Bedienungsanleitung Netgear WG111v3 (Seite 2 von 2) (Englisch)

531672

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

March 2008

This symbol was placed in accordance with the European Union Directive

2002/96 on the Waste Electrical and Electronic Equipment (the WEEE

Directive). If disposed of within the European Union, this product should be

treated and recycled in accordance with the laws of your jurisdiction

implementing the WEEE Directive.

of NETGEAR, Inc. in the United States and/or other countries. Other brand and product names are trademarks or

registered trademarks of their respective holders. Information is subject to change without notice.

Placing the USB Adapter Cradle

You can attach the wireless USB adapter directly to a USB port on your computer, or use

the USB cable to extend the range and obtain better wireless reception.

To use the USB cable, plastic cradle, and loop-and-hook fastener for better USB adapter

placement on a computer monitor:

1. The wireless USB adapter comes with three black

fasteners. Locate the one with a prickly side, and attach it

to the plastic cradle on the middle of the outside rear.

2. Insert the wireless USB adapter in the plastic cradle, and

connect the USB cable.

3. Place one of the other pieces of loop-and-hook fastener on the side or back of your

monitor near the top for better reception. Then join the pieces of the fastener to attach

the USB adapter in the plastic cradle to the monitor.

Using the Status Bar

The status bar is located at the bottom of the Settings screen.

Understanding the Status Bar

Wireless network Identifies which wireless network you have joined.

Security • Locked: security enabled.

• Unlocked: security not enabled.

Channel The wireless channel used by the network. If many wireless networks

in your area use the same channel they can interfere with one

another.

Data rate Wireless data rate measured in Megabits per second.

Signal strength More dots indicates a stronger signal.

Join a Network Click Join a Network to open the Connection Wizard.

Connection

status

Identifies the status of your network connection.

• Connected to Internet: Wireless Internet connection is OK.

• Connected to Router: Wireless connection to the router is OK but

the router is not connected to the Internet.

• 169.254.x.x or ___.___.___.___ : The wireless connection to the

router is OK but there is a problem with the router. See the online

help or the NETGEAR Wireless-G USB 2.0 Adapter WG111v3 User

Manual on the Resource CD.

Wireless

network

Connection status

Security

Join a Network

Channel

Data rate

Signal

strength

Technical Support

After completing the Smart Wizard configuration assistant, locate the serial number on the

bottom label of your product and use it to register your product at

http://www.NETGEAR.com/register.

Registration on the website or over the phone is required before you can use our telephone

support service. The phone numbers for worldwide regional customer support centers are

on the Warranty and Support Information card that came with your product.

Go to http://www.netgear.com/support for product updates and Web support.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Netgear WG111v3 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Netgear WG111v3

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info