Bedienungsanleitung Netgear WGAP150 (Seite 35 von 134) (Englisch)

519682

Zoom out

Zoom in

Vorherige Seite

1/134

Nächste Seite

| 35

WG102-500, WGAP150 ProSafe™ 802.11g Wireless Access Point

• WEP. Wired Equivalent Privacy (WEP) data encryption provides data security. WEP

Shared Key authentication and WEP data encryption block all but the most determined

eavesdropper. This data encryption mode has been superseded by WPA-PSK and

WPA2-PSK. For information about how to configure static and dynamic WEP, see

“Configuring Static WEP” on page 40 and “Configuring Legacy 802.1X (or Dynamic

WEP)” on page 41.

• WPA and WPA-PSK (TKIP). Wi-Fi Protected Access (WPA) data encryption provides

strong data security with Temporal Key Integrity Protocol (TKIP) encryption. The very

strong authentication along with dynamic per frame rekeying of WPA make it virtually

impossible to compromise. WPA uses RADIUS-based 802.1x authentication; WPA-PSK

uses a pre-shared key (PSK) for authentication. For information about how to configure

WPA, see

“Configuring WPA and WPA-PSK (TKIP)” on page 41.

• WPA2 and WPA2-PSK (AES). Wi-Fi Protected Access version 2 (WPA2) data encryption

provides strong data security with Advanced Encryption Standard (AES) encryption. The

very strong authentication along with dynamic per frame rekeying of WPA2 make it

virtually impossible to compromise. WPA2 uses RADIUS-based 802.1x authentication;

WPA2-PSK uses a pre-shared key (PSK) for authentication. For information about how to

configure WPA2, see

“Configuring WPA2 and WPA2-PSK (AES)” on page 43.

• WPA+WPA2 and WPA-PSK+WPA2-PSK Mixed Modes. These modes support data

encryption either with both WPA and WPA2 clients or with both WPA-PSK and

WPA2-PSK clients and provide the most reliable security. For information about how to

configure WPA+WPA2 and WPA-PSK+WPA2-PSK, see

“Configuring WPA+WPA2 and

WPA-PSK+WPA2-PSK Mixed Modes” on page 44.

Security Profiles

Security profiles let you configure unique security settings for each SSID. The wireless

access point supports up to 16 BSSIDs that you can configure in the individual Edit Wireless

Network screens that are accessible from the Wireless Networks screen (see

“Creating and

Editing Security Profiles” on page 37).

To set up a security profile you select its network authentication type, data encryption,

wireless client security separation, and VLAN ID:

• Network Authentication

The wireless access point is set by default as an open system with no authentication.

When you configure network authentication, bear in mind that not all wireless adapters

support WPA or WPA2. Windows XP, Windows 2000 with Service Pack 3, and Windows

Vista do include the client software that supports WPA. However, client software is

required on the client. Consult the product documentation for your wireless adapter and

WPA or WPA2 client software for instructions on configuring WPA2 settings.

For information about the types of network authentication that the wireless access point

supports, see

“Creating and Editing Security Profiles” on page 37.

• Data Encryption

Select the data encryption that you want to use. The available options depend on the

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Netgear WGAP150 Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Netgear WGAP150

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info