Bedienungsanleitung Netgear WPN824 (Seite 154 von 174) (Englisch)

519642

154

Zoom out

Zoom in

Vorherige Seite

1/174

Nächste Seite

Reference Manual for the RangeMax Wireless Router WPN824

D-14 Wireless Networking Basics

202-10072-01, March 2005

3. The client sends an EAP-response packet containing the identity to the authentication server.

The access point responds by enabling a port for passing only EAP packets from the client to

an authentication server located on the wired side of the access point. The access point blocks

all other traffic, such as HTTP, DHCP, and POP3 packets, until the access point can verify the

client's identity using an authentication server (for example, RADIUS).

4. The authentication server uses a specific authentication algorithm to verify the client's identity.

This could be through the use of digital certificates or some other EAP authentication type.

5. The authentication server will either send an accept or reject message to the access point.

6. The access point sends an EAP-success packet (or reject packet) to the client.

7. If the authentication server accepts the client, then the access point will transition the client's

port to an authorized state and forward additional traffic.

The important part to know at this point is that the software supporting the specific EAP type

resides on the authentication server and within the operating system or application “supplicant”

software on the client devices. The access point acts as a “pass through” for 802.1x messages,

which means that you can specify any EAP type without needing to upgrade an 802.1x-compliant

access point. As a result, you can update the EAP authentication type to such devices as token

cards (Smart Cards), Kerberos, one-time passwords, certificates, and public key authentication, or

as newer types become available and your requirements for security change.

WPA/WPA2 Data Encryption Key Management

With 802.1x, the rekeying of unicast encryption keys is optional. Additionally, 802.11 and 802.1x

provide no mechanism to change the global encryption key used for multicast and broadcast

traffic. With WPA/WPA2, rekeying of both unicast and global encryption keys is required.

For the unicast encryption key, the Temporal Key Integrity Protocol (TKIP) changes the key for

every frame, and the change is synchronized between the wireless client and the wireless access

point (AP). For the global encryption key, WPA includes a facility (the Information Element) for

the wireless AP to advertise the changed key to the connected wireless clients.

If configured to implement dynamic key exchange, the 802.1x authentication server can return

session keys to the access point along with the accept message. The access point uses the session

keys to build, sign and encrypt an EAP key message that is sent to the client immediately after

sending the success message. The client can then use contents of the key message to define

applicable encryption keys. In typical 802.1x implementations, the client can automatically change

encryption keys as often as necessary to minimize the possibility of eavesdroppers having enough

time to crack the key in current use.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Netgear WPN824 Seite 154

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Netgear WPN824

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info