Bedienungsanleitung Netgear XAV1601 Powerline AV plus 200 Nano (Seite 18 von 32) (Englisch)

608698

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

18 | Chapter 2. Using the XAV1601 Powerline Utility

XAV1601 Powerline AV+ 200 Nano User Manual

Add a Device to a Powerline Network

If you are adding a device to a Powerline network, and the network encryption key has been

left at its default setting, all you need to do is plug the new device into a power outlet.

If the network encryption key has been customized, there are two ways to set the security:

• You can use the Security button to add the new device to your network. See Adding

Adapters to Your Network on page 9.

• You can use the XAV1601 Powerline Utility to add the new device to the network, as

described in the following sections.

The procedure for setting the network encryption key depends on whether the computer

running the XAV1601 Powerline Utility is connected directly to the new Powerline adapter

(local) or is connected to a different device in the Powerline network (remote).

To add a device from a locally connected computer:

1. Plug the new Powerline adapter into an available AC power outlet.

2. Connect the Ethernet cable that came with the adapter to the adapter’s Ethernet port and an

Ethernet port on the computer.

3. Start the XAV1601 Powerline Utility, click the Refresh button, and wait for the utility to detect

the new device.

4. From the Device Name column select the device.

5. Re-name the device if you wish (see Change the Name of a Powerline Device on page 15).

6. Set the device’s Security option from the drop-down menu.

7. Click the Apply Security to Selected Devices button.

8. Click Close.

Verify that the devices in the Powerline network appear in the device list by clicking the Refresh

button on the Powerline Utility main screen. It might take a minute or two for all devices in the

network to be detected.

Set Up Quality of Service (QoS)

The Quality of Service (QoS) function helps you prioritize your Powerline network traffic.

By default, all types of traffic on the Powerline network are assigned the same priority. For

most applications, this works fine. However, there are situations where performance

improves if you assign a higher priority to certain types of traffic, such as multimedia files.

To prioritize by general application type:

If your network traffic is a mix of multimedia and document/database traffic you might want to

give priority to a particular traffic type. If it is important that your multimedia playback is

smooth, even while document files are being transferred over the network, then give priority

to multimedia traffic. Conversely, if it is more important for your network to be responsive to

database applications, give priority to this type of application over multimedia applications.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Netgear XAV1601 Powerline AV plus 200 Nano Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Netgear XAV1601 Powerline AV plus 200 Nano

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info