Bedienungsanleitung Netgear XAVB2501 (Seite 2 von 2) (Englisch)

519489

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

August 2010

This symbol was placed in accordance with the European Union Directive 2002/96 on the Waste

Electrical and Electronic Equipment (the WEEE Directive). If disposed of within the European Union,

this product should be treated and recycled in accordance with the laws of your jurisdiction

implementing the WEEE Directive.

trademarks of NETGEAR, Inc. in the United States and/or other countries. Other brand and product names are

trademarks or registered trademarks of their respective holders. Information is subject to change without notice.

LED and Button Descriptions

Power

Filtered

Security

Factory Reset

Ethernet port

AC Socket

Powerline LED

LED

Ethernet LED

• Solid green. The electrical power is on.

• Blinking green.The adapter is in the process of restarting or setting up

security.

• Amber. Power saving mode. The unit enters power saving mode if the

Ethernet port is not linked for more than 10 minutes.

• Off. There is no electrical power.

• Solid. The adapter is connected to a Powerline network.

• Blinking. The adapter is sending or receiving data.

• Off. The adapter has not found any other compatible Powerline devices

using the same encryption key.

• Solid. The Ethernet port is linked, but there is no activity.

• Blinking. There is traffic on the Ethernet port.

• Off. There is no Ethernet connection.

Item Description

Power LED

Powerline

LED

The Pick A Plug feature lets you pick the electrical outlet with the strongest

link rate, indicated by the color displayed by the LED:

Green: Link rate > 80

Mbps (Best)

Amber: Link rate > 50

and < 80 Mbps (Better)

Red: Link rate < 50

Mbps (Good)

WARNING!! Do not press the Security button on the Powerline adapter until

installation is complete and the adapters are communicating with each other

(indicated by the blinking Powerline LED). Pressing this button too soon can

temporarily disable Powerline communication. If this should occur, use the Factory

Reset button to return the Powerline adapter to its factory default settings.

WARNING!! To reduce the torque on the AC outlet caused by the weight of the

XAV2501, only a right-angled power cord can be plugged into the filtered AC socket

of the XAV2501 GR(German) and FR(French), and the power cord cannot be bent.

Troubleshooting Tips

For troubleshooting information, see the XAV2501 User Manual. A link to the User

Manual is located on the Resource CD.

Technical Support

Thank you for selecting NETGEAR products. After installing your device, locate the

serial number on the label of your product and use it to register your product at

http://www.NETGEAR.com/register. Registration is required before you can use the

telephone support service. Registration via our website is strongly recommended.

Go to http://kbserver.netgear.com for product updates and Web support.

Ethernet

LED

Factory

Reset

Press the Factory Reset button for 1 second, then release to return the

Powerline adapter to its factory default settings.

Security

Button

After you plug in your new AV adapters, press the Security button for 2

seconds on both of the AV adapters. Both buttons must be pressed within 2

minutes.

Note: The Security button does not work in power saving mode (see the

XAV2501 User Manual for more information).

Filtered AC

Socket

The filtered AC socket can remove some electrical noise which may affect

powerline performance. Plugging the power plugs of nearby devices into the

filtered AC socket may improve performance.

Item Description

For complete DoC, see the NETGEAR EU Declarations of Conformity website at:

http://kb.netgear.com/app/answers/detail/a_id/11621/

Important Safety Information

• AC input:100-125V~, 0.2A (Max; NA) and 200-250V~, 0.2A (Max; others),

for product only.

• Operating temperature: 0C~40C

• The socket-outlet shall be installed near the equipment and be easily

accessible.

• XAV2501 ratings (maximum load): EU: 15A 250V~, UK: 12A 250V~, NA: 14A

125V~, AU: 9A 250V~.

• Only power cords are allowed to be inserted into the filtered AC outlet; no other

equipment with a direct plug-in is allowed. Power cord needs to be a maximum

of 1 m long and a minimum of 0.75 mm square of cross-sectional area.

• Do not plug devices into the XAV2501 filtered AC outlet that exceed the product

ratings.The output voltage of the filtered AC outlet is the same as the power

outlet which the XAV2501 is plugged into. To help avoid damaging your system,

be sure that the attached devices are electrically rated to operate with the

power available in your location.

• If the input AC voltage is less than 125Vac, the device plugged into the filtered

AC socket of the XAV2501 may not perform as well as expected.

• DO NOT PLUG MAJOR HOME APPLIANCES into the filtered AC socket or into

an attached powerstrip. The device is not intended to be used with home

appliances such as air conditioners, power tools, space heaters, fans, hair

dryers, ovens, or refrigerators.

• Check the electrical current for any

appliance used with the device, and do not

exceed home and product outlet ratings

and electrical requirements.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Netgear XAVB2501 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info