Bedienungsanleitung Netgear XR500 - Nighthawk Pro Gaming (Seite 178 von 187) (Englisch)

670486

178

Zoom out

Zoom in

Vorherige Seite

1/187

Nächste Seite

When you connect the router’s Internet port to a modem, use the cable that was supplied with the modem.

This cable can be a standard straight-through Ethernet cable or an Ethernet crossover cable.

WiFi LEDs Are Off

If the WiFi LED, 2.4 GHZ LED, 5 GHz LED, and Guest WiFi LED stay off, check to see if someone pressed

the WiFi On/Off button on the router or if the standard LED settings were changed (see Turn the LEDs On

or Off Using the LED On/Off Switch on page 17 or Disable or Enable LED Blinking or Turn Off LEDs on

page 120).

The WiFi LED, 2.4 GHZ LED, and 5 GHz LED light when the WiFi radios are turned on. However, if the WiFi

guest network is disabled in both the 2.4 GHz band and the 5 GHz band, which the default setting, the Guest

WiFi LED is off. If the WiFi guest network is enabled in either the 2.4 GHz band or the 5 GHz band, the

Guest WiFi LED lights.

You Cannot Log In to the Router

If you are unable to log in to the router from a computer on your local network, check the following:

• If you are using an Ethernet-connected computer, check the Ethernet connection between the computer

and the router.

• Make sure that the IP address of your computer is on the same subnet as the router. If you are using

the recommended addressing scheme, your computer’s address is in the range of 192.168.1.2 to

192.168.1.254.

• If your computer’s IP address is shown as 169.254.x.x, recent versions of Windows and Mac OS generate

and assign an IP address if the computer cannot reach a DHCP server.These autogenerated addresses

are in the range of 169.254.x.x. If your IP address is in this range, check the connection from the computer

to the router, and reboot your computer.

• If your router’s IP address was changed and you do not know the current IP address, clear the router’s

configuration to factory defaults.This sets the router’s IP address to 192.168.1.1.

• Make sure that Java, JavaScript, or ActiveX is enabled in your browser. If you are using Internet Explorer,

click the Refresh button to be sure that the Java applet is loaded.

• Try quitting the browser and launching it again.

• Make sure that you are using the correct login information.The user name is admin, and the password

is the one that you specified the first time that you logged in. Make sure that Caps Lock is off when you

enter this information.

• If you are attempting to set up your NETGEAR router as a replacement for an ADSL gateway in your

network, the router cannot perform many gateway services. For example, the router cannot convert

ADSL or cable data into Ethernet networking information. NETGEAR does not support such a

configuration.

You Cannot Access the Internet

If you can access your router but not the Internet, check to see if the router can obtain an IP address from

your Internet service provider (ISP). Unless your ISP provides a fixed IP address, your router requests an

IP address from the ISP.

Troubleshooting

178

XR500 Nighthawk Pro Gaming Router

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Netgear XR500 - Nighthawk Pro Gaming Seite 178

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Netgear XR500 - Nighthawk Pro Gaming

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info