629278
9
Zoom out
Zoom in
Vorherige Seite
1/40
Nächste Seite
NX-10 User Manual 9
Quick User menu
You can access a limited number of menu options, without entering a
user code, through the Quick User menu. Press OK, and then press
keys to enter and navigate the command menu.
Changing the user interface language
To change the language on your keypad, press OK repeatedly to find
the required language. See page 22 for more information.
User menu
Your user code allows you to perform certain keypad functions
through the user menu. A master user code allows you to perform ALL
keypad functions. A master user is the only person allowed to edit user
information and rights in the system. To access the user menu, press
OK at the default display and enter your user code. Only those menu
options to which you have rights are displayed. Press
to navigate
the user menu.
Note
Your keypad may work slightly differently, depending on how it was set
up by your installer.
Navigating the menus
Press to move through different menu options.
The quick user menu and the user menu contain lists of entries such
as users and zones.
Press # to move to the same menu option for the previous entry in
the list. For example, if you are viewing the user code for user 2, press
#
to view the user code for user 1.
Press #
to move to the same menu option for the next entry in the
list. For example, if you viewing the user code for user 2, press # to
view the user code for zone 3.
Exiting the menu system
•Press ## to display the OK to Exit prompt (if editing data, press
NO first).
•Press OK at this prompt to exit the menu system.
Note: The keypad may timeout from the menu system and return to
the default display.
Note: Press NO key to clear any incorrectly entered user code or other
information.
Note: After exiting the menu or after waking up, the wireless keypad
checks the system state for about 3 seconds. Please allow appropriate
time for the wireless keypad to finish its actions.
Using the NX-10 menus
9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für NetworX NX-10 - V3 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von NetworX NX-10 - V3

NetworX NX-10 - V3 Kurzanleitung - Holländisch - 2 seiten

NetworX NX-10 - V3 Bedienungsanleitung - Holländisch - 40 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info