493206
6
Zoom out
Zoom in
Vorherige Seite
1/20
Nächste Seite
reason, you want to change the
wash programme or add more
washing to the load during the
wash cycle, simply place the
programmer knob in position
“STOP” (the button will start to
flash). Then re-position the knob
on the new programme and press
the “START” button.
SM1744
GB
6
USING THE WASHING MACHINE
START BUTTON
After selecting the required
programme, press this button to
start the wash cycle Button (L) will
light up to indicate the wash cycle
has started.
Warning!! only use this
function if strictly necessary
and then only if the
programme to reset has been
running for a few minutes.
Before opening the door after
a reset, wait 2 minutes for the
locking mechanism to release.
PROGRAMMER KNOB “STOP”
The stop function resets the
washing machine. If, for any
OPTIONAL FUNCTIONS
PREWASH
Press this button and the machine
will perform a prewash at the
maximum temperature of 40°C.
This function can only be used on
the “COTTON” and
SYNTHETICS” programmes.
N.B. When this option is used,
the detergent must also be added
to the appropriate prewash
compartment.
EXTRA RINSE
The washing machine has been
designed to reduce water
consumption to a minimum. In
very soft water areas, or in the
case where detergent residues
are noticed at the end of the wash
cycle, pressing this button will add
one more rinse to the programme.
NB. The use of this function depends
on the type of programme selected.
Consequently, if the wash
programme does not include this
function, the button cannot be
enabled (see PROGRAMME
TABLE”).
The figure alongside shows the 5
main functions of a PREWASH,
WASH, RINSE, SPIN, END wash
cycle:
Each of these functions will be
highlighted during the wash by a
led.
In this way, the user is constantly
aware of the progress of the wash.
After the spin phase, the
MONITORING THE WASH
corresponding led will stay lit for
approximately 2 minutes. This is
the time lapse necessary for the
door release mechanism to work,
after which the END led will light
up.
At this point, press the On/Off
button, open the door and remove
the washing.
L
STOP
Downloaded from www.Manualslib.com manuals search engine
6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für New pol XF6800EL wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info