Bedienungsanleitung NewMotion Home Advanced 2.1 (Seite 5 von 34) (Deutsch, Englisch, Holländisch, Französisch)

802088

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

Safety | 3

5111967B_OI-II_Webasto Unite_EN 5 / 34

lPrevent the charging cable and coupling from coming

in contact with external heat sources, water, dirt and

chemicals.

lDo not attach extension cables or adapters to the char-

ging cable.

lRemove the charging cable by pulling on the charging

coupling only.

lNever clean the charging station with a high-pressure

cleaner or similar device or using a garden hose.

lSwitch off the power supply before cleaning the char-

ging sockets.

lThe charging cable must not be subjected to any strain

during use.

lEnsure only persons who have read these operating in-

structions have access to the charging station.

WARNING

lWhen not in use, store the charging cable in the desig-

nated holder and lock the charging coupling in the re-

mote dock. Loosely wind the charging cable around

the remote dock making sure the cable does not touch

the floor.

lYou must make sure that the charging cable and coup-

ling cannot be driven over, trapped and are protected

from all other hazards.

3.3 Safety information for installation

WARNING

lThe instructions in this document must be followed for

safe installation.

lInstallation and connection of the charging station

must only be carried out by a qualified electrician.

lYou must comply with the locally applicable require-

ments regarding electrical installations, fire protection,

safety regulations, and escape routes at the intended

installation location.

lOnly use the supplied installation material.

lWhen open, ESD (electrostatic discharge) precautions

must be taken properly to avoid electrostatic dis-

charge.

lWhen handling electrostatically sensitive boards, wear

grounded antistatic wrist straps and properly observe

ESD safety precautions. Wrist straps must only be used

when mounting and connecting the loading unit. Wrist

straps must never be worn on a live Webasto Unite.

lElectricians must be properly grounded during installa-

tion of the Webasto Unite.

lDo not install the Webasto Unite in an explosion sens-

itive area (Ex Zone).

lInstall the Webasto Unite in such a way that the char-

ging cable does not block any passageways.

lDo not install the Webasto Unite in areas subject to

ammonia or air containing ammonia.

lDo not install the Webasto Unite in a location where

falling objects may damage it.

lThe Webasto Unite is suitable for use indoors as well

as outdoors.

lDo not install the Webasto Unite in the vicinity of wa-

ter jets, such as car-wash installations, high-pressure

cleaners or garden hoses.

lProtect the Webasto Unite against damage caused by

sub-zero temperatures, hail or similar. We would like

to refer you to our IP protection class at this juncture

(IP54).

lThe Webasto Unite is suitable for use in areas without

access restrictions.

lProtect the Webasto Unite from direct sunlight. The

charging current may be reduced at high temperat-

ures, or charging may be disabled completely.

The operating temperature is -35°C to +55°C.

lThe installation location of the Webasto Unite should

ensure that vehicles cannot inadvertently collide with

it. Protective measures must be implemented if the

possibility of damage cannot be ruled out.

lDo not put the Webasto Unite into operation if it has

been damaged during installation; a replacement will

be required.

3.4 Safety information for electrical

connection

WARNING

lEach charging station must be protected with its own

line circuit breaker and residual current circuit breaker.

See Requirements installation space.

lMake sure that the electrical connections are de-ener-

gised before connecting the charging station to the

power supply.

lMake sure that the correct supply cable is used for the

power connection.

lDo not leave the charging station unattended with the

cover open.

lChange DIP-switch settings only with the power off.

lRegister with the power supply company as required.

3.5 Safety information for initial start-

WARNING

lInitial start-up of the charging station must be carried

out only by an electrician.

lPrior to initial start-up, the electrician must check that

the charging station has been connected correctly.

lDo not connect a vehicle during initial start-up of the

charging station.

lBefore starting-up the charging station, check the

charging cable, charging coupling and the charging

station for visible damage. The charging station must

not be started up if it is damaged or if the charging

cable/charging coupling is damaged.

3.6 Safety information for cleaning

DANGER

High voltages.

Danger of fatal electric shock. Do not clean the char-

ging station with running water.

Details on maintenance, cleaning and repair can be found in the

manual.

3.7 Safety information for replacing

the charging cable

DANGER

Risk of fatal electric shock.

uSwitch off and secure the power supply to the char-

ging station.

NOTE

Only use genuine Webasto parts.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NewMotion Home Advanced 2.1 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info