Bedienungsanleitung NewMotion Home Advanced 2.1 (Seite 22 von 34) (Deutsch, Englisch, Holländisch, Französisch)

802088

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

8 | Webasto Unite Configuration Interface

22 / 34 5111967B_OI-II_Webasto Unite_EN

l"Charge Point Role" defines the role of the charging station

within the cluster:

– "Master" sets it to the controlling unit - if you choose to

set up a dynamic load management cluster, the smart

meter has to be connected to this unit.

– "Slave" sets it to the controlled unit, which is regulated

by the settings made in the Master charging station.

l"Main Circuit Breaker Current" sets the maximum current of

the installed circuit breaker - this is the absolute maximum

current that can be selected for the Cluster.

l"DLM Total Current Limit Per Phase" defines the maximum

current available to the cluster and the total current limit

must be lower or equal to the main circuit breaker current.

l"Supply Type" defines the setting of the cluster (Static or

dynamic):

– "Static" means the cluster is limited to a maximum cur-

rent which will never be exceeded and the cluster is reg-

ulated accordingly.

l"Klefr" means the cluster is limited to the maximum cur-

rent, but it also takes into account real time data from the

externally connected Klefr meter (requires optional ac-

cessories) taking into account also other consumers in the

installation (schematic see chapter6.7.4, "Power optim-

izer / external meter (requires optional accessories)" on

page 13).

l"Garo" means the cluster is limited to the maximum cur-

rent, but it also takes into account real time data from the

externally connected Garo meter (requires optional ac-

cessories) taking into account also other consumers in the

installation (schematic see chapter6.7.4, "Power optim-

izer / external meter (requires optional accessories)" on

page 13).

l"Load Management Mode" defines the algorithm used to

distribute the available current within the cluster:

– "Equally shared" means the available current is distrib-

uted equally within the cluster

– "FIFO" means first in first out, which means vehicles con-

nected first will receive the maximum available power

and later connected vehicles get lower current, depend-

ing on the availability.

– "Combined" means the vehicles connected first are get-

ting higher current and later connected vehicles are get-

ting the leftover power equally distributed.

In this section you can update the DLM group via the button

and then choose all charging stations that are registered within

the cluster.

Various types of data can be shown in this tab.

"Phase connection sequence" defines the order of phases in

case a phase rotation is implemented within the cluster.

8.7.2 Modbus TCP (EMS)

"Modbus TCP" enables the EMS mode. In this mode the char-

ging station can be integrated into a compatible Energy Man-

agement System (Check the online documentation for compat-

ible energy management systems). All EMS specific configura-

tions are done via the energy management system and are com-

municated to the charging station via Modbus TCP.

8.8 System Maintenance

LOG FILES page

Click the buttons to download OCPP or HMI logs.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NewMotion Home Advanced 2.1 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info