Bedienungsanleitung Newstar NS-841HDI (Seite 29 von 47) (Englisch)

552651

Zoom out

Zoom in

Vorherige Seite

1/47

Nächste Seite

the Enter key to select it. Or, you may press Esc to exit OSD and remove the OSD

menu from the display; the status window returns to the display and indicates the currently

selected computer or operating status.

A triangle mark () to the right of a name indicates the port is cascaded to a Slave; the

number at the left of the triangle mark shows the number of ports the Slave has, i.e. 8for

an 8-port Switch. Enter key brings you one level down and another screen pops up

listing the names of the computers on that Slave. The name of the Slave will be shown at

the upper right corner of the OSD menu. It is useful to group computers and still be able to

see the group name.

An eye mark (1) on the right of a name indicates that computer is selected and monitored

in Scan mode. In the OSD, this mark can be switched on or off by function key F2 .

Press Esc key to exit OSD and to return to the selected computer; the computer name is

also shown on the screen.

Function key F1 : To edit name entry of a computer or a Slave with up to 14

characters. First, highlight a port then press F1 followed by name entry. Valid characters

are ‘A’~’Z’, ‘0’~’9’, and the dash character. Lowercase letters are converted to uppercase

ones. Press Backspace to delete a letter one at a time. Non-volatile memory stores all

name entries until you change, even if the unit is powered down.

Function key F2 : To switch the eye mark (1) of a computer on or off. First, use the

Ï and Ð arrow keys to highlight it, then press F2 to switch its eye mark on or off. If

Scan Type is 'Ready PC +1', only the power-on and eye mark selected computers will be

displayed sequentially in Scan mode.

Function key F3 : To lock a computer from unauthorized access. To lock a device,

highlight it then press F3 . Now, enter up to 4 characters (‘A’~’Z’, ‘0’~’9, ‘-‘) followed by

Enter as a new password. A Security-enabled device is marked with a lock (±) following

its port number. To permanently disable the security function from a locked device,

highlight it, press F3 then enter the password.

If you want to access the locked device temporarily, simply highlight it and press Enter ,

the OSD will ask you for the password. After entering the correct password, you are

allowed to use the device. This device is automatically re-locked once you switch to

another port. During Scan mode, the OSD skips the password-protected devices.

Function key F4 : More functions are available by hitting F4 . A new screen pops up

displaying more functions as described below. Most of them are marked with a triangle ()

indicating there are options to choose from. Using arrow key “ Ï “, “ Ð “ to select the

functions, and then press Enter . Available options will be shown in the middle of the

screen. Again, using arrow keys “ Ï “, “ Ð “ to view options, and then press Enter to

select it. You can press Esc to exit at any time.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Newstar NS-841HDI Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info