Bedienungsanleitung Nextbase 222 (Seite 28 von 36) (Englisch)

698684

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

How to Check your Dash Cam’s current Firmware Version

Within the Setup Menu, on page 3, select ‘System Info’. Here you will find information relating to your

Dash Cam, including what firmware version is currently active (i.e R05.3).

Ways to Update Firmware on your Dash Cam

Connect your Dash Cam’s SD Card to PC or Mac using a card reader. This will open a file explorer drive,

(e.g) Removable Disk (E:) and show the contents of your SD Card. Go to the ‘Support & Downloads’ page

on nextbase.com and download the newest firmware version (i.e R05.4); this will download as .bin file.

Drag and drop the .bin file to the SD Card explorer.

Eject the SD card and insert it back into your Dash Cam. When you connect the power cable your Dash

Cam will turn on, and will automatically begin updating. While updating, both the Nextbase™ logo

beneath the screen and the red LED to the left of the screen will start flashing.

Once the update has been completed, the logo and LED will stop flashing, and your Dash Cam will

automatically restart.

If you have a PC, You can also update your Dash cam using the ‘Update Dash Cam’ function on

MyNextbase Player™. This function will NOT work on a Mac. Connect your Dash Cam to PC via USB, select

‘Firmware Update’ and open up MyNextbase Player™ (available to download for free from nextbase.com).

Select ‘Update Dash Cam’. A pop-up will appear on your PC describing your current firmware, and the

latest version available. When you select update, your Dash Cam will automatically begin updating.

While the Dash Cam is updating, both the Nextbase™ Logo below the screen, and the red LED will flash.

Please note that an internet connection is required for the Dash Cam to be updated.

If ‘Keep User Settings’ is turned ON in the Setup Menu, your Dash Cam will boot up normally,Notes:

straight into video live view mode, ready to use. If ‘Keep User Settings’ is turned OFF, after the update is

complete, the Dash Cam will boot up into the First Time Use menu, which must be completed before the

Dash Cam can be used.

Be sure to externally back up any files you want to keep before updating the firmware.

Your Dash Cam will show the following message: “Firmware Updating... Update takes

approx 2 mins. Do not disconnect power!”

www.nextbase.com

Upd ating ...

Firmware controls the basic functioning of the Dash Cam.

If your Dash Cam is not functioning correctly, you may

need to update the firmware.

Firmware updates may also be released to fix bugs, and

improve the general functionality of the Dash Cam.

In short, it’s important to keep the firmware on your

Dash Cam up to date so it can operate to it’s full capacity.

We recommend you regularly check for updates to get the

most from your new Dash Cam

Firmware Update Information

Use the supplied USB cable to connect the Dash Cam

directly to your PC via the socket on top of the

Dash Cam;

do NOT connect the USB cable to the Powered Mount.

Once connected the Dash Cam will turn on with two options

available; ‘Access Files’ and ‘ Power On ’, as described below.

Use the UP and DOWN buttons to select required function

and press OK to confirm selection.

Access Files (Windows)

When this option is selected, the Dash Cam will function as a card reader for your PC. An extra drive will

appear, e.g. NEXTBASE (D:) and you will be able to view / manage the stored files upon the MicroSD card

within the Dash Cam. You will be able to view your files using your system’s default media player.

The Dash Cam is a ‘read-only’ device, therefore uploading files to the SD card when in Mass Storage

mode is not possible. If you wish to add files to the SD card you can do this using a MicroSDcard reader.

Access Files (Mac)

When this option is selected, the Dash Cam will function as a card reader for your Mac. The 'Nextbase’

external USB disk icon will appear on your Mac and you will be able to view and/or manage stored files.

You will be able to view your files using your system’s default media player.

The Dash Cam is a ‘read-only’ device, therefore uploading files to the SD card when in Mass Storage

mode is not possible. If you wish to add files to the SD card you can do this using a MicroSd card reader.

Power On (Windows & Mac)

When this option is selected, the Dash Cam will power on with all functions available. This includes

charging of the internal battery; a full charge will take approximately 2 hours.

PC Connection

ALWAYS turn OFF the Dash Cam

before disconnecting from your PC/Mac.

Access Files

Power On

PC Connection

Firmware Update

MODE

Enter

Use ‘MyNextbase Player’

to update your Dash Cam

Firmware, by selecting

‘’Update Dash Cam’’.

Firmware Update

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nextbase 222 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nextbase 222

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info