Bedienungsanleitung Nextbase in-Car Cam 302G deLuxe (Seite 18 von 20) (Englisch)

570052

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

TROUBLE SHOOTINGTROUBLE SHOOTING

onto satellite.

Video Image is blurred

Video recording is jumpy.

Video has no sound.

Photgraph is blurred.

I can only record a few minutes

of video on my SD card.

Mass Storage or PC Camera

function does not work.

The sucker will not stay in place

upon my windscreen.

The AV Out from my iN-CAR CAM

just buzzes on my TV.

I get the message “Card Error”

on screen.

I get the message “Memory error”

on screen.

I get the message “Card Full” on

screen.

With the IR LED's turned on, they

do not seem to enable night time

recording at a distance, in zero

light conditions.

My iN-CAR CAM shuts down by

itself after a while.

No power to my iN-CAR CAM,

but it works upon my PC.

The SD card in my iN-CAR CAM

can not be read.

I can't delete files on my SD card

within the iN-CAR CAM.

The screen blanks after a few

minutes upon my iN-CAR CAM.

I get the message “Cluster Wrong”

on screen.

I get the message “Card protected”

on screen.

I have turned on ‘motion detection’

and now can’t stop the recording.

The iN-CAR CAM can not lock

After power on and with the device mounted with clear view of the sky it can

take up to 10 minutes to find the three satellites required to achieve a stable

signal. Reception can also be affected by atmospheric conditions and the

proximity of buildings / trees obscuring the sky.

Turn iN-CAR CAM off and on to restart GPS search procedure.

Remove the protective lens cover, clean the lens, clean the windscreen

inside and out.

Remove the SD card and reformat to remove non-contiguous files.

For best recording use a branded class 10 type (30MB/s) SD card of

8 to 32GB recommended size. Playback PC may not be sufficient for the

playback software, try an alternative PC.

Ensure that “Record Audio” setting is turned ON within the Video Menu.

Hold the camera still whilst taking the photo. Please be aware the photo

is taken around 1 second after the shutter noise is heard.

Change the recording size (Loop recording function) to a smaller size.

Increase the size of the SD card. Max 32GB.

Will only work with Windows PC's. Restart the PC, as this may be

required for the necessary driver to be loaded correctly. Disconnect

and reconnect the In-CAR CAM. Contact NEXTBASE for the required driver.

Ensure that the rotary dial is fully counter clockwise. Make sure that the

glass is smooth and clean. Do not stick to glass that has any non-smooth

effect or paint whatsoever. Affix to the glass firmly and then rotate the dial

clockwise, until the latch is felt to engage.

Ensure that the AV cable is correct. Use a stereo 3.5mm jack plug where

the tip is the video and the ring is the audio signal.

The SD card has become unuseable by the iN-CAR CAM. Remove useful

files using your PC and then perform a “FORMAT” upon the SD card

from within the SETUP menu.

The SD card has become unuseable by the iN-CAR CAM. Remove useful

files using your PC and then perform a “FORMAT” upon the SD card

from within the SETUP menu.

The SD card has become full as the Loop recording function is set to

OFF. Set the “Loop Recording” function to 3 mins (default) to enable the

cycle recording function and automatic deletion of older files.

Normal. The IR LED's are intended for close range use only.

Either the battery has gone flat, or there is no power to the iN-CAR CAM

and the AutoPower Off period (which is in the SETUP menu) has been

triggered.

The cigarette power cable is not working. Inspect the fuse in the Car Power

plug. Replacement fuse = 2A 20mm type. If the fuse if found to be blown,

inspect the power cable for damage which may have caused the fuse blow.

Use a good quality branded SD card between 8GB and 32GB (suggested)

and format the card from with in the SETUP menu of the iN-CAR CAM.

Check to see if these files are 'protected', if so please follow instructions

to 'un-protect'

The screen saver is set to ON. Change settings to OFF if required.

Default setting is off.

The SD card has been formatted in another device and the Cluster Size is

not compatible. Simply use the MENU, SETUP option to re-format the SD

card from within the iN-CAR CAM.

Remove the SD Card and slide the locking tab away from the ‘Lock’ position.

The iN-CAR CAM will start a recording whenever motion is detected, when

function is to be turned off firstly shutdown the iN-CAR CAM and remove the

SD card, this will avoid recording being activated accidentally. Switch back

on the and within the setting menu and turn off the ‘Motion Detection’.

English

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nextbase in-Car Cam 302G deLuxe Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nextbase in-Car Cam 302G deLuxe

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info