Bedienungsanleitung Nextbase in-Car Cam 402G Professional (Seite 15 von 40) (Deutsch, Englisch)

570051

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

MENUS AND SETTINGS

Each mode (Video, Photo and Playback) has a menu used to access the various options and settings, press the

MENU button on the rear of the device to access the menu, specific to the current mode selected.

Use the UP, DOWN buttons to select chosen option and press the OK button to confirm.

1.1 Resolution

Select recording resolution, this will increase or decrease the quality of the recorded video.

Default Setting:

1.2 Exposure

Select exposure, used to adjust exposure level for different light conditions.

Default Setting:

1.3 White Balance

Adjust the white balance for different light conditions.

Default Setting: Auto

1.4 Record Audio

Turn On / Off audio recording.

Default Setting: On

1.5 Date Stamp

Turn On / Off the date stamp shown on recorded files.

Default Setting: On

1.6 Loop Recording

Select duration of recording length for the individual video files, the iN-CAR CAM will fill the SD Card then loop

back to the beginning, overwriting the saved files (unless protected).

Default Setting:

1.7 G Sensor

Turn Off or adjust the sensitivity of the G Sensor, it is the G Sensor that detects forces which will automatically

protect the current recording in event of a collision.

Default Setting: Middle

1.8 Motion Detection

Turn On / Off the motion detection function, the device will need to remain on and will start a 10 second

recording when a change to the viewed scene is detected.

Default Setting: Off

1.9 Number Plate

Enter the registration number for your vehicle, this will then be shown on the video file.

Default Setting: ********

1.10 Driver Fatigue Warning

Set the timer which will display an image of a hot beverage to serve as a reminder to take sufficient rest

when on a long journey.

Default Setting: Off

1.11 GPS Track

Turn On / Off the GPS co-ordinate stamp shown on recorded files, co-ordinates and map will function as

normal when viewed with the Driving Recorder Player no matter whether this function is set to On or Off.

Default Setting: On

1.12 Compass

When turned on, the screen will display current speed and a compass after the selected period of time,

press any button to return to normal viewing, this function is only available when a GPS connection is present.

Default Setting: Off

1.13 Password Settings

Set a password that will need to be entered to access menus and settings, only basic functions of power

on / off and start / stop remain available.

1.13 Speed Units

Select whether to record and display speed in KMH or MPH.

Default Setting: MPH

1.14 Rotate Display

Rotate the display 180

VIDEO MODE

1080P (1920x1080 @ 30Fps)

3 Minutes

°, particularly useful should iN-CAR CAM be mounted on the dashboard, the control

button functions do not rotate.

English

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nextbase in-Car Cam 402G Professional Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nextbase in-Car Cam 402G Professional

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info