Bedienungsanleitung NGM Raptor (Seite 16 von 47) (Englisch)

567585

Zoom out

Zoom in

Vorherige Seite

1/47

Nächste Seite

User Manual

If a SIM card is inserted, the mobile phone will automatically check the SIM card availability and then the

following informations will be show the on the display by sequence:

1. “Input phone password”— if you have set a password for the phone.

2. “Input PIN” —if you have set the telephone to ask for the SIM card password.

3. “No service”— indicates failure to register; the phone cannot make any calls.

4. “Emergency calls only”— indicates that the phone has registered to other network and can only make

emergency calls to 112.

5. “Searching”— the mobile phone is searching for a network.

6. “Operator name”— indicates network successfully registered.

Note: If you do not know your PIN code, please contact the network service provider. The mobile default password

code is “1122”.

Power OFF

To switch off the mobile phone, press the End key. When the screen displays the switch-off animation, the

primary and the secondary SIM cards will be turned off at the same time. Do not take out the battery to

switch off the mobile phone. If so, the SIM cards can be easily damaged and data could get lost.

Dial a call

 With the keypad, you can directly enter phone numbers (if inserting a wrong character, press the Back

key or “←” to delete it). Press the OK key to open the call menu. Choose Call and then SIM1 or SIM2.

After the call is connected, you can see the call timer on the screen. If your dialed number is saved in

mobile phone memory, the contact name will be displayed on screen. To end a call, press the END key.

 Dial a call through the Phonebook: enter the Phonebook menu and search the desired name/phone

number, and then press OK key to open the call menu. Choose Call and then SIM1 or SIM2.

 Redial latest dialed number: in standby state, press the OK key to view the list of the 20 latest dialed

phone number or names. Browse to the desired phone number or name and press OK to dial a call.

Adjust the receiver volume

When speaking to someone, press the VOLUME UP and VOLUME DOWN buttons on the side of the phone to

adjust the volume.

Answer a call

When there is an incoming call, you will be alerted by ringing, vibration, vibration and ringing, or vibration then

ringing, according to the settings of the mobile phone. To receive a call, press the OK key. To refuse a call, press

the END key directly.

If the CLI (Call Line Identity) is opened, the phone number of the caller will be shown on the screen. If this

number has been saved in the phonebook, the name corresponding to this number will be displayed on the screen.

By pressing the OK Key, you will access an Options screen, where you are allowed to put on hold the current

call, connect to another incoming call, record a call, enable the background sounds (to recreate the realistic

ambient sounds during a particular call, i.e. “platform” “airport”, “station”, “restaurant” and other user-recordable

sounds) or refuse the call through SMS.

Options during conversation

During the call conversation process, choose “Options” to have the following function menu:

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NGM Raptor Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info