Bedienungsanleitung NGM Van Gogh (Seite 30 von 42) (Englisch)

567627

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

User Manual

(separately for SIM1 and SIM2) when you got messages left on your answering machine. In Messages, you can

listen to answering machine messages stored in your phone’s own internal memory. This feature allows to save

money avoiding connection to mobile network operator’s voicemail system. In Settings, you can enable/disable the

auto-answer, select the storage path for the messages (phone or memory card), set the pickup time (3, 5, 10 or 30

seconds), set the max. record duration (30 seconds, 1 minute, 3 minutes, 5 minutes, or unlimited), select the

greeting message (predefined file or user-defined audio), and finally enable remote access to the answering machine

through a DTMF compatible phone. To listen for messages from remote, enable the answering machine as well as

Remote access in Settings menu; you need then a touch-tone telephone to send DTMF. When the voice mail system

answers and prompts you to leave a message, then digit “#” and wait until the system prompts you to enter your

password (1234 by default)).

Note: remote access supports only the listening function.

Phone control

Phone Control is a function that has been designed to improve mobile device users’ privacy and security. It is

composed of two applications (SIM binding and Remote Control), allowing user to manage security in different

modes and with varying levels of security strength.

SIM binding

The SIM binding function is offered to help end-user to find his phone just in case it has been lost or stolen. The

function is based on the binding between SIM card and phone: the device shall be able to recognize when a different

SIM card has been inserted in the phone and immediately alert by SMS the 5 trusted numbers previously set by the

user. By activating this option, the phone password will be requested (1122). Please refer to the paragraph

“Security settings” in the chapter “Settings” for the instructions on how to modify this password. Select “SIM

binding” and choose “On” to enable the function. The user must now insert

at least one number for SMS

notification.

From Phone Control menu, select “Trusted Numbers” and insert up to 5 phone numbers to receive the message.

After completing configuration, at every start-up the phone will check the presence of the SIM cards to which is

bound to. If the two SIM cards are inverted or one of them has been removed, the phone shall starts regularly. If a

not-bound SIM card is inserted on SIM1 or SIM2 slot, the phone shall display the “Input phone password” popup

(the default password is 1122, freely modifiable by user). If the password is correctly inserted, the phone shall

starts regularly, but a popup should advise the user that the SIM card is changed: “SIM card is changed. Do you

want to bind it?” Choosing “Yes”, the current SIM cards will be bound replacing the old ones; choosing “No”, the old

binding will remain active. If the password is wrongly inserted, the phone shall start and provide the “new” user all

the functionalities except the “Phone control” menu. In the meantime, one alert SMS ( - Attention: this phone

number is using your mobile phone IMEI: XXXXXXXXXXXXXXX - ) shall be sent to all the trusted phone numbers set

in the menu from each replaced SIM card. Every time the power on password is wrongly inserted, the phone shall

continue to send SMS out. If SIM1 has no money or is out of range, SIM2 shall provide to send alert SMS out. If the

SMS is not correctly sent out for any reason, the phone shall attempt to send the SMS out periodically, until the SMS

is correctly sent out.

Note: if Phone lock is enabled, this function chronologically comes before SIM binding. This means that even if

the SIM binding is activated, it will be unavailable if the wrong password is inserted (because the phone simply

won’t boot).

Tip: to avoid this problem, it’s advisable to disable Phone lock and enable Privacy firewall instead, since this

function assures the same high level of security and does not inhibit the use of SIM binding.

Remote control

The Remote control function is offered to provide end-user the possibility to manage some phone functions

remotely from another phone able to send SMS out. Using this function, end user can, when he has not the

phone with him, forward calls, power the phone off, activate the answering machine. By activating this option, the

phone password will be requested (1122). Please refer to the paragraph “Security settings” in the chapter

“Settings” for the instructions on how to modify this password. Select “Remote control” and choose “On” to

enable the function. The user must now insert at least one number for SMS notification. From Phone Control

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NGM Van Gogh Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info