NGM Victor24
© 2011 NGM Italia
5 Basic Operations
1. Switch On
2. Switch Off
3. How to Dial a Call
4. Adjust Receiver Volume
5. Answer a Call
6. Dial Hold
7. Fast SMS Reading
8. Missed Calls
5.1 Switch On
Switch On
Press the Switch-on/off (End) key to start the mobile phone, then the screen will display the
switch-on image. When the standby screen is displayed, press the OK key to enter the main
menu. Then you can enter Settings menu to set phone modes, including Dual SIM Open, Only
SIM1 Open, Only SIM2 Open and Flight Mode. The defaulted one is Dual SIM Open.
After inserting SIM card, the mobile phone will automatically check the SIM card availability, and
then it will be show the following informations on the display by sequence:
1. “Input phone password”— if you have set a password for the phone.
2. “Input PIN” —if you have set a password for SIM card.
3. “No service”— indicates failure to register; the phone cannot make any calls.
4. “Emergency calls only”— indicates that the phone has registered to other network and can
only make call to 112.
5. “Searching”— the mobile phone is searching for an appropriate network.
6. “Operator name”— indicates network successfully registered.
Nota: If you do not know your PIN code, please contact the network service provider. The mobile
default password code is “1122”.
5.2 Switch Off
Switch off
To switch off the mobile phone, press the End key. When the screen displays the switch-off
animation, the host and the slave SIM will be off at the same time. Do not take out the battery to
switch off the mobile phone. If so, the SIM card can be easily damaged and some data will be lost.
5.3 How to Dial a Call
How to Make a Call
With the number keypad, you can enter phone numbers (if wrong characters are input, press
the Back key to delete them). Press the Dial keys to dial the phone number. In SIM1 and SIM2
On state, you can choose to dial a call via SIM1 or SIM2 (Send1 and Send2 keys, respectively).
To end a call, press the End key; or to cancel a dial, press the Back key or the End key. After
the call is connected, you can see the call timer on the screen. If your dialled number is saved in
mobile phone memory, the contact name will be displayed on screen.
Dial a call via Phonebook: enter the Phonebook menu and search the desired name/phone
number, and then press Dial keys to dial.
Redial latest dialed number: in standby state, press Dial keys (SIM1 o SIM2) to view the list of
