555356
73
Zoom out
Zoom in
Vorherige Seite
1/90
Nächste Seite
© National Instruments Corporation B-1 NI 17xx Smart Camera User Manual
B
Troubleshooting
This appendix provides instructions for troubleshooting the NI Smart
Camera.
Configuration Problems
The NI Smart Camera Does Not Appear in MAX or Vision Builder AI
Possible causes and solutions:
The smart camera may not be powered. Verify that there is power to
the smart camera and that both the smart camera and the development
computer are properly connected to the network. The POWER LED
should be lit green and the ACTIVITY/LINK LED should flash green
when refreshing the list of devices in MAX or Vision Builder AI.
The smart camera may have been configured on another network
subnet and then moved to the current network subnet. Reconfigure
the smart camera on the current network. Refer to the Subnet
Considerations section of Chapter 7, Ethernet Ports, for more
information.
Another device on the network is using the IP address assigned to the
smart camera. This can happen when you assign the same static IP to
two devices, you assign a static IP that is in the range of the IP address
available for DHCP use on your network, or the DHCP server assigns
the same IP address to another device. Either remove or reconfigure
the other device, or reconfigure the smart camera to use a different
IP address by moving the IP RESET DIP switch to the ON position
and reapplying power or restarting the smart camera. Refer to the
IP RESET Switch section of Chapter 6, LEDs and DIP Switches,
for more information.
You are experiencing firewall issues. If you are having difficulty
detecting the system and setting up the NI Smart Camera on your
network, you must configure the firewall to open the TCP/UDP ports
used by the smart camera and the host machine. Refer to the Firewall
Considerations section of Chapter 7, Ethernet Ports, for more
information about TCP/UDP ports.
73

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für NI Vision NI 17xx wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info