Bedienungsanleitung Niagara 2200 (Seite 1 von 2) (Englisch)

641187

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

Quick Start Guide

Niagara

2200

Congratulaons on the purchase of your new Niagara 2200.

The following steps in this Quick Start Guide will help you set up and

congure your Niagara 2200 so you can begin streaming or capturing

video as quickly as possible. The Niagara 2200 web interface also allows

quick and easy access to its operaonal features. You must modify any

advanced setup opons of the Niagara 2200 encoders through this

interface before running an encoder session.

Complete the following steps to begin operang the Niagara 2200:

12 VDC Input for 100-240 volts, AC, 50-60 Hz

Plug the included power supply for the

Niagara 2200 into this connector and plug

the opposite end into an AC power source.

You may connect analog component, composite, or S-Video to the

Niagara 2200 as follows:

Component BNC Input , ,

The Niagara 2200 includes analog

component video BNC inputs.

Composite BNC Input

The Niagara 2200 includes a BNC-to-RCA

adapter so you can connect a composite RCA

video source to the BNC connector labeled

CVBS-Pb.

S-Video Input ,

You will nd this standard consumer video

connector on most video players and video

cameras. This connecon may require an

addional S-Video adapter (included).

NOTE: Three BNC-to-RCA adapters are included with your

Niagara 2200. These adapt the Component and Composite

BNC connectors to a common RCA connector found on most

consumer video cameras and video players. Also provided is a

Y/C video adaptor for connecng an S-Video source.

Unbalanced Audio Input

These RCA connectors provide le and right ste-

reo inputs. RCA connectors (standard consumer

stereo audio connecons) are on most video

players and video cameras.

Balanced Audio Input

These XLR connectors provide le- and right-

balanced stereo inputs. High-end audio and

video equipment may have these professional

connectors.

RJ-45 Ethernet Connector

The Niagara 2200 provides two network con-

nectors. Use either the primary

or secondary ethernet ports to connect to your

IP network.

NOTE: Contact your network administrator for assistance

if you are unfamiliar with network protocols.

The Niagara 2200 network sengs default to dynamically obtain an

IP address from a DHCP server on the network. For most network environ-

ments, you do not need to modify these default sengs. If the Niagara 2200 does

not nd a DHCP server or it remains unavailable on the network, the Niagara 2200

assigns its own IP address.

Once connected to a network, you should be able to access the built-in web

server by browsing to the unique machine name (the serial number is lo-

cated on the boom or side of the appliance). You may also set the IP address

through the web interface.

If you do not have a DHCP network or you cannot connect to the Niagara 2200

through its DNS name, you can connect a monitor, mouse, and keyboard direct-

ly to the Niagara 2200 to USB ports. The Niagara 2200 will have a Microso®

Windows 7 desktop.

The rst me you power on the Niagara 2200, the system takes a few moments

to boot up. From a separate computer on the same network as the Niagara

2200, launch a web browser such as Internet Explorer and enter the IP address

of your Niagara 2200.

1) Check to ensure you connect all devices (power cords, video and

audio sources, etc.) to the Niagara 2200.

2) Press Power on the front panel to start the Niagara 2200.

3) Browse to the Niagara 2200 from another computer on the

same network using Internet Explorer.

4) Click in the User Name eld and enter admin as the user name.

Then click in the Password eld and enter admin as the

password. Finally, click Log In or press Enter.

NOTE: System administrators should previously congure all

user names and passwords for those who they allow to log

on to the system. The default login username and password

are admin.

5) The rst me you start the Niagara 2200 and log in, the system

prompts you for the date, me, and video standard. You may

accept the default date, me, and video standard or select your

own opons, then select Submit.

6) The system may re-display the Admin Log In window again once

you submit the date, me, and video standard elds. You must

enter User Name and Password again.

7) This me when you enter your valid user name and password,

the system displays the Welcome window and Niagara 2200

Main Menu.

8) To view available encoder proles, from the menu bar click

Encoders > All Encoders.

9) This example demonstrates how to create an MPEG4

stream. Click Edit to the le of the Flash encoder to open

the Encoder Properes window. Check to ensure the

video, audio, and streaming sengs for the encoder

prole match your hardware setup using the Video, Audio,

and Output tabs. You may start a stream from the Encoders

window by clicking on Start MPEG4 Encoder in the upper

right area of the window.

Video

2. Connect video and audio sources

Audio

3. Connect to an IP network

4. First start setup

1. Connect to an electrical power source

Continued on back

Contact ViewCast Technical Support at support@viewcast.com.

40-03330-01-A

, Niagara

(and design)

are registered trademarks of ViewCast Corporation

or its subsidiaries. All other trademarks are the property of their respective owners. Product specications and availability

may change without notice.

US / Canada +800-540-4119

Europe / Middle East / Africa +44 1256 345610

Asia / Pacic +852 2251 8778

Niagara 2200 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Niagara 2200

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info