Bedienungsanleitung Niagara 9100 Series V7.0 (Seite 1 von 2) (Englisch)

641182

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

Congratulations on the purchase of your new Niagara 9100 system.

The following steps in this Quick Start Guide will help you set up and

congure your new streaming media system, so you can begin stream-

ing or capturing video as quickly as possible. The Niagara web interface

allows quick and easy access to its operaonal features. You must modify

any advanced setup opons of the encoders through this interface before

running an encoder session.

Complete the following steps to begin operang the Niagara 9100.

AC power connector for 120-240 volts,

AC, 50-60 Hz (A on Figure 1)

Plug the power cable included with your system

into this connector and plug the opposite end

into an AC power source.

Note: Redundant systems include two power connecons.

Video and audio inputs will vary between Niagara 9100 models.

The inputs may be combinaons of the following connecons (E on

Figure 1).

Composite BNC Input

A BNC-to-RCA adapter connects a com-

posite RCA video source to the BNC

connector.

SDI Video Input

The high-denion and standard-

denion serial digital interface (SDI)

is a professional video input that may

include embedded audio. SDI uses a

COAX cable with a BNC connector.

Unbalanced Audio Input

These connecons are provided on a

breakout cable. These RCA connectors

provide le and right stereo inputs.

You will nd RCA connectors (standard

consumer stereo audio connecons) on

most video players and video cameras.

Niagara 9100-IP models

The audiovisual source is connected

on RJ-45 ethernet connecons. These

connecons can be ports (D on Figure

1) or a quad IP card (E on Figure 1).

Analog Video

2. Connect Video and Audio Sources

Analog Audio

1. Connect to an electrical power source

Continued on back

Quick Start Guide

Niagara

9100

Contact ViewCast Technical Support at support@viewcast.com.

40-03319-02-A

, Niagara

(and design)

are registered trademarks of ViewCast Corporation

or its subsidiaries. All other trademarks are the property of their respective owners. Product specications and availability

may change without notice.

US / Canada

800.250.6622

Europe/Middle East/Africa

+44 1256 345610

Asia / Pacic

+852 2251 8778

Digital Video

6) The rst me you start the Niagara 9100 and log in, the system

prompts you for the date, me, and video standard. You may

accept the default date, me, and video standard or select

your own opons, then click Submit.

7) The Admin Log In window may reappear once you submit the

date, me, and video standard elds. You must enter User Name

and Password again.

8) This me when you enter your valid user name and password,

the system displays the Welcome window and menu bar.

9) To create an encoder prole, from the menu bar click

Encoders > All Encoders. This example demonstrates how to create

a Microso Windows Media encoder.

10) Click Create new encoder.

Figure 1. Niagara 9100 Back Panel

3. Connect to an IP Network

4. First Start Setup

RJ-45 Ethernet connector (D on Figure 1)

The Niagara 9100 provides two network

connecons. Use either the primary

or secondary jack (or both) to connect to your

IP network.

NOTE: Contact your network administrator for assistance

if you are unfamiliar with network sengs.

The network sengs default to dynamically obtain an IP address from a DHCP

server on the network. For most network environments, you do not need to

modify these default sengs. If the system does not nd a DHCP server or it

remains unavailable on the network, it assigns its own IP address.

Once connected to a network, you should be able to access the built-in web

server by browsing to the unique machine name (the serial number located on

the boom of the appliance). You may also set the IP address through the web

interface.

If you do not have a DHCP network or you cannot connect to the appliance

through its DNS name, then you can connect a monitor to the VGA port (C on

Figure 1), and a mouse and keyboard directly to the USB ports (B on Figure 1).

The appliance has a Microso Windows 7 desktop.

The rst me you power on the appliance, the system takes a few moments to

boot up.

1) Check to ensure that you connect all devices (power cords, video and

audio sources, etc.) to the Niagara 9100.

2) Remove the front panel from the Niagara 9100: Press in the release buon

(J on Figure 2) and gently pull the panel toward you.

3) Press Power (P on Figure 2) to start the Niagara 9100.

4) From a separate computer on the same network as the Niagara

system, launch a web browser such as Internet Explorer and

enter the serial number or IP address of your system in the

address bar. The serial number is located on the boom

or the side of the system in the format fexxxxxxxx.

5) Click in the User Name eld and enter admin as the user name.

Then click in the Password eld and enter admin as the

password. Finally, click Log In or press Enter.

Left

Right

IP Input

* Redundant systems include

two power connecons.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Niagara 9100 Series V7.0 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Niagara 9100 Series V7.0

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info