Bedienungsanleitung Niagara B264 openGear Encoder (Seite 104 von 120) (Englisch)

641175

104

Zoom out

Zoom in

Vorherige Seite

1/120

Nächste Seite

104

Continuity Counter field. On request, Niagara Video can supply a test program

for Windows or Linux that receives the Ramp48 packets and checks them.

o PCR Packets: TPG is generating packets with a valid PCR field (stamped

corresponding to the packet’s departure time at the configured bit rate). The

packets have a small payload with random data, so the Continuity Counter field is

valid and counting.

 PID: controls the PID of the generated packets. This field accepts both decimal and

hexadecimal values (prefixed with 0x).

 Bit Rate (bps): controls the bit rate of the generated packets. The minimum value is

64,000 bps and the maximum value is 213,000,000 bps.

Admin License Keys Tab

The B264 has a number of optional licensable features. The Admin License Keys Tab is used to

manage these features. Using this tab, you can see how many licenses you have for each

optional feature, and how many you are currently using.

The B264 has the concept of a temporary license. If you want to try out a certain feature, contact

Niagara Video. You will receive, free of charge, a license key that enables that feature for a

specific period of running time (license time does not “count” when the card is off).

The Admin License Keys Tab includes a License Status table, and a configuration area, as shown

below. The table rows are license counts, and the columns correspond to different licensable

features. The rows are:

 Permanent Licenses: This is the number of non-expiring licenses for each feature.

 Temporary Licenses: This is the number of temporary licenses for each feature. Once

the license period expires, they are removed.

 Total Licenses: This is the total number of licenses for each feature. It is simply the sum

of the permanent and temporary licenses.

 Used Licenses: This is the number of licenses in use for each feature by the current card

configuration.

If you have temporary licenses, the Time Remaining field indicates how long until they expire.

If you do not have temporary licenses, this field has the message “No active temporary licenses”.

The table columns correspond to the licensable features, as follows:

 AAC-LC Pairs: The B264 requires one license per instance of AAC-LC stereo encoding.

Note that AAC-LC is required for the operation of some OTT protocols.

 Extra MP2 Pairs: One MPEG-1 Layer II license is included with each encoder channel.

This field counts the additional licenses.

 SD Instances, HD/1080i Instances, HD/1080p Instances: The maximum output

resolution for the B264 is subject to licensing. Note that if the encoder has a license for a

particular resolution, that license is good for any lower resolution as well.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Niagara B264 openGear Encoder Seite 104

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Niagara B264 openGear Encoder

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info