-e-
encoder to rain or other types of moisture could result in
impairment to the encoder and physical injury or death to
you and/or others.
Encoder shall not be exposed to water or moisture in any
way. Liquids in any form should not be placed on or near
the encoder. If you place liquids in any form on or near
the encoder, do so at your own risk, for there is a high
risk of electrical shock that could occur, which may
cause damage to the encoder and/or personal physical
injury or death to you and/or others.
Refer all servicing to authorized service personnel.
Servicing is required when the encoder has been
damaged in any way, such as the power supply cord or
plug is damaged, liquid has been spilled on the encoder,
or objects have fallen into or onto the encoder, the
encoder has been exposed to rain and/or other types of
moisture, does not operate as described in the User
Guide, or has been dropped. This list is nonexclusive.
Cisco assumes no liability or responsibility for any
encoder still in use that has been damaged in any way,
manner or form.
With the encoder, employ only attachments, accessories
and/or any and all other equipment specified by the
manufacturer.
Do not use accessories or attachments not recommended
by the encoder manufacturer. This will void the Limited
Warranty. Only approved docking trays may be inserted
in the docking bay.
Do not in any manner attempt to service the encoder
yourself, as opening or removing covers may expose you
to dangerous voltage, and will void the Limited
Warranty. Refer all servicing to authorized service
personnel.
The plug-socket combination must be accessible at all
times, because it serves as the main disconnecting
device.
Protect the power cord from being walked on, strained or
pinched in any way, particularly at plugs, electrical
receptacle, and the point where the power cord exits
from the encoder.
