Bedienungsanleitung Nikkei NTT05U (Seite 8 von 12) (Englisch)

612764

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

4. Center Spindle

This spindle holds the turntable PLATTER records

stable and centered.

5. Strobe Indicators Pilot Lamp

This is lamp specially designed to pulse a beam of

light at the STROBE INDICATORS on the turntable

PLATTER. This will give the illusion that indicators

are not spinning at certain speeds.

6. Power Switch

This is a rotary power switch. To turn main power

on turn the switch in a clockwise direction. To turn

main power off turn the switch in counterclockwise

direction.

7. Start/Stop Button

This over sized push button controls platter motion.

When the unit is turned on the platter will not

automatically begin to spin. Pressing the button

once will engage the high torque motor and spin

the platter, pressing this again will stop the platter.

8. Headshell

The included HEADSHELL is used to connect your

stylus with the tone arm.

9. Headshell Locking Nut

After attaching the headshell to the tonearm, this

locking nut will securely hold the headshell to the

tonearm.

10. S-Shaped Tone Arm

The tonearm is the mechanism that holds the HEAD-

SHELL and stylus allowing it to glide across a record.

11. 33-RPM Speed Select Button

Engaging this button will rotate the platter at 33

revolutions per a minute (RPMs). A function LED

will glow when this function is activated.

12. 45- RPM Speed Select Button

Engaging this button will rotate the platter at 45

RPMs. A function LED will glow when this function

is activated.

13. Pitch Control Slider

This slider is used to adjust the playback pitch

percentage (platter speed).

14. Tone Arm Lever

This lever is used to safely elevates the tone arm

above a record surface without endangering a

records surface.

15. Tone Arm Clamp and Rest

Use this rest to safely hold the tonearm in position

during non use and transportation.

16. Anti-skate Knob

The anti-skate applies inward force to the tonearm

to prevent outward skipping across the record due

to the centrifugal force cause by platter rotation.

The anti-skate value should be equally to that of

the stylus counterweight pressure.

17. Stylus-Pressure Ring

＊The counterweight scale must face toward the

DJ.

18. Extra Stylus Holder

This cut out has been designed to safely store an

extra stylus headshell.

19. Counterweight

Use the counterweight to balance the tone arm and

to adjust the stylus pressure.

20. Hinge For Dust Cover

21. USB Socket (USB cable limit within 3m)

After connecting the Turntable to the computer

via USB, you can record your vinyl to your hard

disk using the included Audacity software.

22. Phono/Line Selector

This switch is used to change the mode of phono

output or line output.

23. RCA output Jacks

The output is able to switch to PHONO output or

LINE output. For example: These jacks are used

to send a low voltage "phono" level output signal

to a mixers "phono" input jacks. Turntables should

be connected to “Phono” inputs on a mixer. The

red colored RCA jack represents the right channel

input and the white represents the left channel

input.

CONTROLS OVERVIEW

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nikkei NTT05U Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nikkei NTT05U

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info