Bedienungsanleitung Nikkei STYXX20128 (Seite 3 von 5) (Englisch)

8492

Zoom out

Zoom in

Vorherige Seite

1/5

Nächste Seite

Note: When HOLD is on, in order to save power, press / , the player will be powered off after it displays

the model number and .

VIII.CONNECTING TO A COMPUTER

1. Installation of driving program

Note:

A. Windows 98 base needs installation of driving program, while Windows 2000/ XP/ ME do not.

B. Disconnect the MP3 player to the computer before installation is completed.

C. Windows 2000 Service Pack 3.0 (in the installation CD) must be installed under Windows 2000.

a. Load the provided installation CD in to the driver compartment.

b. Double clicks on SETUP.EXE, pictures will be shown as follows:

Then clicks to Next->Yes->Next->Next->Finish according to the reminder.

Installation is finished.

2. Connecting to a computer

Connect your MP3 player to PC via USB cable, One click on

/ or under condition that MP3 player has been on

status, the window will appear indicating that new hardware has been found, then the system will automatically install

the drive program. After it, a mobile disk icon (see following) will be found in "My computer" with "PC----" on LCD

display.

3. Upload/ Download files

So long as the driving program has been properly installed, the MP3 player itself is a mobile disk after being connected

to a computer. Therefore the file transfer is operated in the same way as the ordinary disk.

Note: a. Don't unplug the MP3 player during the process of uploading or downloading files; otherwise, it may

cause dysfunction of the unit due to the damage to the software.For details, please see Trouble shooting.

b.When you want to unplug the MP3 player from the USB port of the computer, be noted to "PC-- --" on LCD.

If LCD is blinking with "USb-SA" or "Usb-rd", it indicates that data is being transferred. Unplug the MP3 player

when it displays "PC-- --".

Special notice: Normal uninstallation for USB device is required under Windows 2000 or Windows XP; otherwise

it may cause damage or data loss to the player.

Operating steps are as follow:

a.Double clicks on icon of "Unplug or Eject Hardware" on bottom right corner of the computer (note: under XP, it is

"delete hardware safely") as following:

7 8

9 10

b.Click Stop on the pop-up window. Refer to the following picture on the left.

c.Click OK on the pop-up window. Refer to the following picture on the right.

d.Click OK on the pop-up window. See the following window. You may then unplug the MP3 player from USB port

after the above steps.

4. Upgrade/ Renew Software

Better not upgrade the software unless the player works abnormally, i.e. not able to be powered

on.

A.Connect MP3 with computer.

B.Press

/ , or MP3 has already been in ON status, then a mobile disk icon will appear in "My Computer" , see

picture a:

C. Steps: Start>Program>SigmaTelMSCN Audio Player>SigmaTel MSCN Firemware Download, see the following

picture b.

a b

Then a window will pop out as picture c:

After the above windows close automatically, the window of upgrading software will pop out as picture d:

c d

Note: if you want to farmat data area of the flash while upgrading, you need to choose Format Data Area.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nikkei STYXX20128 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nikkei STYXX20128

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info