Bedienungsanleitung Niko 10-570 (Seite 31 von 40) (Deutsch, Englisch, Holländisch, Französisch)

619037

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

31EN

10-570

4.2.4: Setting internal calls

Internal Call

01: Living SN 828725

02: Bisness SN 824065

03: Reception SN 213695

04: Room 001 SN 412690

05: Room 0 SN 0

06: Room 0 SN 0

07: Room 0 SN 0

08: Room 0 SN 0

09: Room 0 SN 0

10: Room 0 SN 0

Back Up Down OK

Here you can assign names to and identify the internal units that can be called by the

user. You can choose from 10 different name designations or assign a number to each

internal call. The possible name designations are: Kitchen, Living room, Bedroom,

Upstairs, Business, Private, Reception, Concierge, Doctor, Emergency.

By pressing you can move the cursor to the next changeable field. Using or

choose the correct name designation or number of the internal unit that can be called

and then enter the serial number of the internal unit in the same manner. Only the

internal calls that you have programmed will be visible to the user.

4.2.5: Changing device settings

System Parameter

OSD Info: Enable

Language: English

MIC Vol: 

SPK Vol: 

:Factory Setting

:Reset

Back Up Down OK

OSD Info: If “Disabled”, the extra information (such as external unit number and key

functions) which accompanies a call is no longer displayed on the screen.

Language: 5 languages can be set: English (standard), Dutch, French, German and

Slovak.

VOL.: The volume of the micro and the speaker can be adjusted.

Factory Setting: All settings are erased and the device returns to the factory de-

faults.

RESET: The device is restarted and calibrates itself.

4.2.6: Device info

Device Info

ID: 194 Name:10-570

Ver: 5.A.6 SN: 481296

BBS: 1.2.0 Mode:Freehand

Alarm:No PS: No

Touch:Yes CUS: NIKO

Back

Here you can find serial number (SN), the article number and the software version.

Setting times

By default, the following times are programmed:

Speech time after initiating a call (SPEECH TIME) 45s

Automatic conversation cut-off time after the door is opened 4s

Time that the camera image or the menu remains active (DISPLAY TIME) 60s

Number of times that the green LED flashes when the video or speech channel is busy 3 times within 6s

Time that a call from an external unit or a floor bell push button is signalled 120s

Time that a floor call is remembered 30s

You can set other times via

• the power supply 10-80X

• the service device 10-870

• the relay 10-83x

Also see the manuals of the respective devices.

5. TROUBLESHOOTING

In case of problems, always first check with a multimeter whether the following voltages are present:

• between b and a: approx. +24V DC;

• between b and P: approx. +24 V DC;

• between M and P: approx. +24V DC;

• between M and V1 or V2: approx. +5V DC.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Niko 10-570 Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Niko 10-570

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info