733849
8
Zoom out
Zoom in
Vorherige Seite
1/41
Nächste Seite
14 15
En
Fr
Pt
Es
En
Fr
Pt
Es
Changing battery
Type of battery: 3V CR2 lithium battery x1
Battery remaining amount indicators
* Battery condition mark in the internal display warns when the battery needs to be replaced.
: Battery has enough power for use.
: Battery level is getting low. Prepare to replace the battery.
: Battery level is low. Battery should be replaced with a new one.
flashing : Battery is exhausted. After the indicator flashes three times, the laser rangefinder
automatically powers off. Please replace the battery.
1. Open the battery chamber cover
Insert a coin or similar item into the slot on the battery chamber cover, then rotate it until the indicator
aligns with the mark. It may not open easily due to its rubber packing for water resistance.
2. Replace the old battery with a new one
Insert a new battery with the [+] and [-] correctly positioned following the “Battery installation”
indication in the battery chamber. [+] pole should be towards the inside of the chamber. If the battery is
not inserted correctly, the laser rangefinder will not operate.
3. Close the battery chamber cover
Align the mark with the indicator
and insert the battery chamber cover. Insert a coin or similar
item into the slot on the battery chamber cover, then turn the cover towards the mark until the
indicator
aligns with it. It may not close easily due to the rubber packing for water resistance. Confirm
that the cover is securely closed.
Battery life
Continuous operation: Approx. 13,000 times (at approx. 20°C)
This figure may differ according to condition, temperature, and other factors such as target shape, color, etc. Use
only as a guide.
* The battery supplied with this Laser Rangefinder is for operation checking. Due to natural electrical discharge, the life of this
battery will likely be shorter than that noted above.
* If water enters the battery chamber due to submersion, dry the battery chamber well, then replace the battery.
Target priority mode
This laser rangefinder employs the First Target Priority/Distant
Target Priority switching system (Factory default setting is First
Target Priority mode).
1. Turn on the power (Confirm the internal display is on).
2. Press and hold the MODE button, then depress and hold
the POWER ON/Measurement button within 0.5 second.
Continue to press and hold both buttons (more than
2 seconds) until First Target Priority mode and Distant
Target Priority mode are switched.
3. Release both buttons when the mode is switched.
* If the buttons are not pressed in the correct order,
switching will not take place.
* If switching fails to take place, repeat Step 2.
[First Target Priority mode/Distant Target Priority mode]
When measuring overlapping subjects, First Target Priority
mode displays the distance of the closest subject and
Distant Target Priority mode displays that of the farthest
subject.
Distance display units
Meter [ ]Yard [ ]
Measurement results are displayed in yards/meters.
(Factory default setting is yard.)
1. Turn on the power (Confirm the internal display is
on).
2. Press and hold the MODE button for more than two
seconds. When the display unit has been switched,
release the button.
3. After the unit is set, results will be converted and
displayed in the selected distance display unit.
First Target Priority mode
Distant Target Priority mode
8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Nikon ARROW ID 5000 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info