Bedienungsanleitung Nikon Callaway iQ (Seite 7 von 39) (Englisch, Französisch, Portugiesisch, Spanisch)

604480

Zoom out

Zoom in

Vorherige Seite

1/39

Nächste Seite

12 13

Internal display

1. 『』- Target aiming/Laser irradiate system

『

』- Aim at the target. Position the target at the center of the reticle.

『

』- Appears while the laser is being used for a measurement.

 (Remainspresentduringsinglemeasurement.Blinksduringcontinuousmeasurements.)

  Warning:Donotlookintotheobjectivelenseswhenthismarkisshown.

2．Upper display



Lower display

Upper 4 digits: Linear distance

 Displayofresults:( ＜ 999.9 meters/yards) e.g. 234.9 meters = 『

』

 Displayofresults:( ≧ 1,000 meters/yards) e.g. 1,065 yards = 『

』

Lower 3 digits: Slope adjusted distance

The results of "Horizontal distance ± Height"

Displayofresults:( ＜ 999 meters/yards) e.g. 235 meters = 『

』

 Displayofresults:( ≧ 1,000 meters/yards) 『

』

『

』 Now measuring

『

』 Failure to measure or unable to measure distance

3. 『

』Display units

『

』Indicates distance being measured in meters.

『』Indicates distance being measured in yards.

4. 『』Indicatesbatterycondition.(See"Changing Batteries")

5. Measurementresultsandsymbolsign

- Calculates linear distance to your target, and displays the result in the upper 4-digit 7-segment

display.

-Calculates the slope adjusted distance to your target by measuring linear distance and angle,

and displays the result in the lower 3-digit 7-segment display.

Active Brightness Control Viewfinder

Active Brightness Control Viewfinder detects light conditions of

the ground area mainly in the view field

and, when necessary,

automatically turns on the orange LED illumination.

The brightness of the orange illumination is adjusted

automatically according to the light conditions.

Although the LCD was produced using the most advanced

technology, it is impossible to eliminatedustcompletely.When

using this product, the LCD is magnified by high magnification

of the eyepiece lens and dust may appear as a defect. It will not,

however, affect measurement accuracy.

Upward Downward

Distance/measurement status display

Digitally indicates measured distance in meters/yards. Also indicates

measuringstatussuchas“Measurementinprogress”,“Measurement

unsuccessful” or “Unable to measure.”

Operational summary

Caution — use of controls or adjustments or

performance of procedures other than those

specified herein may result in hazardous radiation

exposure

1. Install a battery in the battery chamber. (See "Changing

Batteries")

2. Rubber eyepiece cup

Both eyeglass wearers and non-wearers can use this

rangefinder without attaching the rubber eyepiece cup.

3. Diopter adjustment

Adjust diopter to obtain a clear image in the LCD.

First, rotate the diopter adjustment ring counterclockwise until

it comes to a complete stop. Next, turn on the power to activate

the LCD when you look through the Nikon Callaway iQ. Rotate

the diopter adjustment ring clockwise until the display comes

into focus.

If the diopter is not adjusted to correspond to your eyesight,

you may not be able to aim your subject.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nikon Callaway iQ Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info