E
Press the
J
button until the desired
flash mode indicator appears.
•For details, see the reference page of each
flash mode.
AUTOJ Auto flash (-P. 21)
↓
$
Infinity focus
(-P. 25)
↓
#
Flash cancel
(-P. 22)
↓
J
Anytime flash (-P. 22)
↓
Auto flash with slow sync
(-P. 23)
•When the camera power is turned off,
the flash mode reverts to auto flash.
21
1
Turn the camera on.
•
“
AUTOJ
”
appears on the LCD panel.
Auto flash mode is automatically
activated.
•The camera senses when the available
light is low and automatically fires the
flash.
•When the subject is bright, “
#
”
appears on the LCD panel and the flash
does not fire.
→
2
Check that the red LED
comes on, then shoot.
•Before shooting with flash, make sure
the subject is within the flash shooting
distance range. Refer to the following
guide (ISO 200).
(24mm): approx. 0.6 to 5.3 m (2 to 17.4 ft.)
(48mm): approx. 0.6 to 2.8 m (2 to 9.2 ft.)
•
If the red LED blinks when the shutter release button is
pressed lightly, the flash is being charged and the shutter
is locked. Lightly press the shutter release button again
and wait for the red LED to light up before reshooting.
The flash automatically fires when the available light is low.
Auto flash photography
Selecting the flash mode
