Bedienungsanleitung Nikon Coolpix 950 (Seite 12 von 57) (Englisch)

565483

Zoom out

Zoom in

Vorherige Seite

1/57

Nächste Seite

- 12 -

When the mode dial is set to A-REC or M-REC, the current flash

setting can be changed using the button next to the

control panel. The setting changes each time the button is pressed,

cycling through the different flash modes in the following order:

SLOW

AUTO

Tips

When lighting is poor and the flash is set to “Off” ( ) or “Slow Synchro”

( ), shutter speed is slowed and photos may be blurred. If possible, use

a tripod when lighting is poor.

The built-in flash will automatically be set to “Off” when:

• you use autofocus with a setting of “Infinity” ( )

• you choose a multi-shot setting of “Continuous,” “16-shots” or “VGA

sequence” (an external flash can still be used with these settings)

• you use best-shot selection (BSS)

• you use lens converter (LENS) settings

• the AE LOCK option in the M-REC menu is on

When using the flash, be sure the flash window is unobstructed.

Using an External Flash

A flash bracket (the SK-E900 Multi-Flash Bracket Unit) is available sepa-

rately for connecting external flash units to the COOLPIX 950. When the

bracket is connected to the camera’s synchro-flash terminal, external flash

units mounted on the bracket are synchronized with the camera’s built-in

flash, increasing the size of the area illuminated and allowing sophisticated

flash techniques such as bounce-flash photography. You can use flash

settings such as “Auto,” “Slow Synchro,” and “On” with both the external

and built-in (internal) flash units, or you can turn the built-in flash off and

use the external flash only (to turn off the built-in flash, use the CON-

TROLS item in the M-REC setup menu). When the flash is fired, the

brightness of the external and built-in flash units is controlled by the

camera.

Instructions for attaching the optional SK-E900 flash bracket and connect-

ing external flash units may be found in the SK-E900 instruction manual.

When the SK-E900 is in place, the following Nikon flash units (available

separately) can be used: SB-28, SB-26, SB-25, SB-24, SB-22S, and SB-22.

The use of non-Nikon flash units is not recommended.

Once the external flash unit has been mounted on the flash bracket and the

bracket’s lead connected to the camera’s synchro-flash terminal, you are

ready to use the external flash for synchro-flash photography. Turn the

flash unit on (do not set the flash to “stand-by”—STBY—as the flash may

turn off unexpectedly), set the metering mode to TTL, and choose an

illuminating angle of less than 28 mm. The intensity of the light produced

by the flash will be controlled by the camera’s built-in photocell.

Flash status is indicated by the red

flash lamp next to the viewfinder.

Flash lamp glows red: The camera is ready to fire the flash

when the shutter-release button is

fully pressed.

Flash lamp blinks: The flash is charging. Wait until the

lamp glows steadily before taking a

picture.

Using the Buttons (A-REC, M-REC): Flash Settings

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nikon Coolpix 950 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nikon Coolpix 950

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info