Bedienungsanleitung Nikon COOLPIX P1000 (Seite 106 von 244) (Englisch)

678563

106

Zoom out

Zoom in

Vorherige Seite

1/244

Nächste Seite

Movies

Basic Operations of Movie Recording and Movie Playback

• Memory cards with an SD Speed Class rating of 6 or faster are recommended for

recording movies (when recording 4K UHD movies at an image size/frame rate of

2160/30p or 2160/25p, cards rated UHS Speed Class 3 or faster are

recommended). When using a memory card with a lower Speed Class rating,

movie recording may stop unexpectedly.

B Camera Temperature

• The camera may become hot when recording movies for an extended period of time or

when the camera is used in a hot area.

• If the inside of the camera becomes extremely hot when recording movies, the camera

will automatically stop recording. The amount of time remaining until the camera stops

recording (B10s) is displayed.

After the camera stops recording, it turns itself off.

Leave the camera off until the inside of the camera has cooled.

Notes About Movie Recording

B Notes About Saving Images or Movies

The indicator showing the number of exposures remaining or the indicator showing the

remaining recording time flashes while images or movies are being saved. Do not open

the battery-chamber/memory card slot cover or remove the battery or memory

card while an indicator is flashing. Doing this could result in loss of data, or in damage to the

camera or the memory card.

B Notes About Recorded Movies

• The sounds of control ring operation, zoom control operation, zoom, autofocus lens drive

movement, vibration reduction, and aperture operation when brightness changes may be

recorded.

• The following phenomena may be seen on the screen while recording movies. These

phenomena are saved in the recorded movies.

- Banding may occur in images under fluorescent, mercury-vapor, or sodium-vapor lighting.

- Subjects that move quickly from one side of the frame to the other, such as a moving

train or car, may appear skewed.

- The entire movie image may be skewed when the camera is panned.

- Lighting or other bright areas may leave residual images when the camera is moved.

• Depending on the distance to the subject or the amount of zoom applied, colored stripes

may appear on subjects with repeating patterns (fabrics, lattice windows, etc.) during

movie recording and playback. This occurs when the pattern in the subject and the layout

of the image sensor interfere with each other; it is not a malfunction.

B Notes About Autofocus for Movie Recording

Autofocus may not perform as expected (A65). Should this occur, focus using manual

focus (A67) or try the following:

1. Set

Autofocus mode

in the movie menu to Single AF (default setting) before starting

movie recording.

2. Frame another subject (positioned at the same distance from the camera as the intended

subject) in the center of the frame, press the b (e) button to start recording, and modify

the composition.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nikon COOLPIX P1000 Seite 106

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nikon COOLPIX P1000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info