Bedienungsanleitung Nikon F6 (Seite 143 von 192) (Englisch)

15454

143

Zoom out

Zoom in

Vorherige Seite

1/192

Nächste Seite

143

Menu Guide

Camera status/control during interval timer operation

• When the set interval is relatively long, the camera’s exposure meter turns off.

Camera’s meter turns on 30 sec. before shots are taken. In autofocus operation,

autofocus is activated 2 sec. before shots are taken.

• Rear LCD panel display changes to shooting data and camera’s settings can be

confirmed by pressing the INFO button.

• Normal shooting can be performed during interval timer photography. The interval

timer remains active and the selected repeating time and number of shots per

operation do not change.

• A set of shots will be canceled when focus cannot be achieved in Single Servo AF.

However, the next (and successive) set of shots will be taken.

• Interval timer is canceled when the film is rewound during the interval timer.

• An interval can be set regardless of the set/controlled shutter speed. When the start

time before the interval timer photography is reached during normal shooting, the

current set of shots will be canceled but next (and successive) set of shots will be taken.

• When the shutter speed is set to buLb, the shutter speed is automatically

controlled to 1/10 sec.

Combining interval timer with other functions

• In mirror up mode (x 84), each exposure starts approx. 0.4 sec. after the mirror is

up.

• When two or more shots are selected for one operation in single frame shooting or

mirror up mode, film advance mode automatically changes to CL (continuous low-

speed).

• When combined with Auto Exposure Bracketing (x 75), the number of shots in

one operation is automatically set to the number of shots selected in Bracketing.

When Auto Exposure Bracketing is set during interval timer operation, the number

of shots in one operation changes to the number of shots in Bracketing. (Number

of shots returns to the number set in interval timer when Bracketing is canceled.)

• Interval timer can be used together with multiple exposure mode (x 138).

For example, if the number of multiple exposure shots is set to three and the

number of shots in one in interval timer operation is set to two, two multiple

exposure shots will be taken in first set of shots (film is not advanced). The third

shot will be taken as the first shot of the next set of shots. The film is then

advanced, multiple exposure is canceled and the second shot is taken. Normal

interval timer photography is executed thereafter.

Imprinting data in interval timer photography

• Set the interval time to 2 sec. or longer when data imprint (x 126, 130) is

simultaneously set at temperature below 0°C (32°F). Also, data may not be imprinted

properly when Bracketing (x 75) is simultaneously set at low temperatures.

P930_En 04.10.19 7:19 PM Page 143

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nikon F6 Seite 143

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nikon F6

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info