Bedienungsanleitung Nikon F75 (Seite 20 von 67) (Englisch)

501564

Zoom out

Zoom in

Vorherige Seite

1/67

Nächste Seite

BASIC OPERATION 2

• When the built-in Speedlight is ready to fire, ‡ appears without blinking in the

viewfinder (when the camera’s meter is on).

• When you want to take a picture without the flash, close the built-in Speedlight

until it clicks shut while lightly pressing the shutter release button. (When the flash

is cancelled in this manner, as long as the shutter release button is kept lightly

pressed, flash is cancelled for subsequent shots. When you remove your finger

from the shutter release button and shutter release button is lightly pressed again,

the built-in Speedlight pops up again and flash starts charging.)

• To cancel the flash, select the Flash Cancel mode (page 93) before lightly pressing

the shutter release button.

3938

Using Built-In Speedlight

When the subject is dark or backlit and the shutter release button is lightly

pressed, the built-in Speedlight automatically pops up in a or Vari-Program

(except in d or g). Fully depress the shutter release button to take pictures

with the Speedlight.

When the subject is dark or backlit and the shutter release

button is lightly pressed, the built-in Speedlight

automatically pops up and starts charging.

Built-in Speedlight and Multi-Sensor Balanced Fill-Flash

• The built-in Speedlight offers an angle of coverage of 28mm lens with a guide

number of 12 (ISO 100, m). When a wide-angle lens of less than 28mm focal length

is used in flash photography using the built-in Speedlight, the flash may not reach

the peripheral area and may result in a dark picture.

• Using CPU Nikkor lenses such as a G- or D-type Nikkor lens enables use of 3D

Multi-Sensor Balanced Fill-Flash. Analysing the brightness and contrast level

derived from Matrix Metering, the 3D Multi-Sensor Balanced Fill-Flash ensures

proper exposure of the main subject and background, while providing adequate

flash output to create natural-looking flash photography. See page 91 for details.

NOTE: Continuous use of built-in Speedlight

After continuous use of the built-in Speedlight, it may stop firing to protect the firing

tube. Wait for a while before using the built-in Speedlight again.

Confirm ‡ in viewfinder, then compose, focus and take the

picture with flash by fully depressing the shutter release

button.

Check points

• Be sure to remove (or store) the lens hood before flash shooting.

• Some lenses have limitations using the built-in Speedlight and may cause vignetting

(a shadow may appear within the frame) (page 100).

• Normal Front-Curtain Sync flash mode is introduced in this section. Various flash

sync modes are also available. For details, see page 92.

• The shutter cannot be released unless ‡ appears without blinking in the

viewfinder.

• ‡ blinks in the viewfinder approx. 3 sec. after full flash output. If this happens,

underexposure may have occurred. Check the flash shooting distance range

(page 98) and shoot again.

• With dark subjects, the camera’s AF-Assist Illuminator is automatically activated

to guide autofocus. See page 50 for details.

F75 (En) 03.1.23 11:09 AM Page 38

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nikon F75 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nikon F75

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info