Bedienungsanleitung Nikon SB-25 (Seite 48 von 73) (Englisch)

570934

Zoom out

Zoom in

Vorherige Seite

1/73

Nächste Seite

9594

Chapter

Repeating Flash Mode

If necessary, press or button to reset the indi-

cator bar so it points at the measurement scale

that matches or nearly equals the actual flash-to-subject

distance (can be read this from the lens barrel).

Manipulating the indication bar causes aperture value in the

LCD panel to change.

Reset aperture value on the camera.

Use an aperture one or two stops smaller than the LCD

panel indicates. This will prevent overexposure for overlap-

ping images (“minus” exposure compensation).*

* Subject will be correctly exposed with the very first flash, but successive over-

lapping images (form the second flash on) will not be properly exposed, unless

you perform minus exposure compensation as indicated in steps 9 and 10. We

recommend you take a few additional shots at different apertures (exposure

bracketing).

Automatic aperture adjustment: F90-Series/

N90, F4-Series, F-801/N8008, or F-801s/

N8008s used with an AF Nikkor lens (including lat-

est D-Type) or Nikkor lens having a built-in CPU

The aperture in use and an indicator bar are

automatically indicated in the SB-25’s LCD panel. With

other lenses, you must operate manually following

steps 8, 9 and 10.

To skip steps 8, 9 and 10, check whether subject

stands at the location suggested by the LCD’s mea-

surement scale. If not, change the aperture by turning

the lens’ aperture ring to adjust the bar.

Finally, perform “minus” exposure compensation* to

prevent overexposure of overlapping images—use the

aperture ring to choose another aperture one or two

stops smaller than indicated above.

* The aperture indicated by the LCD provides a correct exposure with the

very first flash, whereas overlapped images are illuminated from the

second flash on. It is advisable to take a few additional shots at differ-

ent apertures (exposure bracketing).

Set the same aperture value in the SB-25’s LCD Panel

that you set on the camera (step 7).

For instruction, see “Setting Aperture Values (Manual

Adjustment),” pages 28 to 29.

An indicator bar appears to show appropriate shooting

distance for the selected aperture.

Background brightness and subject overlap

Use as dark a background material as possible (e.g.,

black curtain or cloth). If the overlapping exposed

images are too weak or too strong, try repositioning

subject at the location suggested by the indicator bar

(or adjust indicator bar).

Conditions vary for each situation — try experiment-

ing.

Look into camera viewfinder, compose and lightly

press the shutter release button to confirm that sub-

ject is in focus.

Check that ready-light is on in the camera’s viewfinder or

on the SB-25 .

Fully depress shutter release button to fire flash.

SB-25_En 03.1.14 8:18 PM Page 94

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nikon SB-25 Seite 48

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nikon SB-25

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info