64
1
Mount the SB-27 as a master flash unit on the camera.
2
Connect the master flash unit to the slave flash unit(s).
—Turn OFF all flash units when connecting.
3
Set the flash mode selector of all the flash units to TTL.
—Do not set the power switch to the STBY position.
4
Setting up a master flash unit and slave unit(s)
Set the zoom-head position and the flash-to-subject distance on
the master flash unit. Set up the slave unit(s) in the same way.
5
Follow the same procedures as in normal TTL Auto Flash
mode.
Multiple flash operation— (Cameras in Groups I thru
TTL multiple flash operation procedures
See page 66 on usable flash units and accessories for multiple
flash operation.
NOTE
Using the SB-27 as a slave flash unit (for cameras in
Groups I thru VI)
When using the SB-27 as a slave unit, set the camera setting
switch to ˚ in order to activate the Forced TTL function (see
page 69). Forced TTL simply disables the standby function. If
the camera setting switch is set to K, the standby function
will work and the slave flash will not fire.
