Bedienungsanleitung Nikon SB 50DX (Seite 28 von 39) (Englisch)

3274

Zoom out

Zoom in

Vorherige Seite

1/39

Nächste Seite

5554

Double-Flash Operation

By attaching the SB-50DX to a camera that has a built-in Speedlight, you

can easily perform double-flash operation.

• Double-flash operation with built-in Speedlight (with the SB-50DX

in horizontal position)

1. Attach the SB-50DX to the camera body and release the camera’s built-in

Speedlight.

• Set the flash head in the horizontal position.

• Release the camera’s built-in Speedlight. (See your

camera’s instruction manual).

• The camera Speedlight detecting lever detects that

the camera’s built-in Speedlight is activated. The

LCD panel shows indicating the horizontal

position of the SB-50DX flash head and

indicating the built-in Speedlight.

2. Set the zoom-head position (p. 16) on the SB-50DX. (For the angle of

coverage of the camera’s built-in Speedlight, see your camera’s instruction

manual).

Angle of

coverage of

the built-in

Speedlight

Angle of coverage

of the SB-50DX

• The usable focal length of the lens should be

determined by the angle coverage of the camera’s

built-in Speedlight. With a zoom lens, select the

zoom position so that it is within the angle of

coverage of the built-in Speedlight.

• With a CPU lens and cameras of Group I, II or

Nikon Digital SLR, the zoom-head position is

automatically adjusted by the Power Zoom function

(p. 16). When the Power Zoom is not activated with

camera/lens combination in use, manually set the

zoom-head position (p. 17) so that it corresponds to

the angle of coverage of the lens’ focal length.

3. Shoot following the same procedure as in normal TTL auto flash operation

(p. 20).

• Set the flash mode on the SB-50DX to TTL auto (p. 18).

• For the combined guide number in double-flash operation, see p. 33.

• With F65-series/N65-series set to AUTO mode or Vari-Program, built-in

Speedlight does not fire even when it is up.

• For available exposure mode in double-flash operation with the F70-series/N70,

see "Exposure mode with the Nikon F70-series/N70" on p. 42.

• In double-flash operation with the Nikon F70-series/N70 or PRONEA 600i/

PRONEA 6i camera, see "When using the Nikon F70-series/N70 or PRONEA

600i/PRONEA 6i" on p. 42.

Multiple Flash Operation Using Cords

For detailed information about function, operation, connection, etc., see

the instruction manual for your camera and Speedlight.

• TTL multiple flash operation using cords

1. Turn off all the Speedlights and connect the

TTL multiple flash terminals with the

optional TTL Multi-Flash Sync Cord SC-18/

SC-19 (p. 56)

• The SB-50DX does not come with a TTL

multiple flash terminal. Use the optional TTL

Remote Cord SC-17/SC-24 (p. 56) for TTL

multiple flash operation.

Slave

flash unit

Subject

Using SB-50DX or SB-23 as a slave flash unit

When using the SB-50DX or SB-23 as a slave flash unit in TTL multiple flash

operation using cords, the SB-50DX or SB-23 may turn off during operation

since the standby function of the Speedlight cannot be canceled. Use of the

SB-50DX or SB-23 as a slave flash unit is not recommended.

Notes on TTL multiple flash operation using cords

Take care that the combined total of the coefficients (numbers shown in

parentheses below) for all Speedlights used at any one time does not exceed 20

at 20°C (68°F) or 13 at 40°C (104°F). (One coefficient equals approx. 70 mA.)

SB-80DX (1) SB-50DX (1) SB-30 (1) SB-29s (1) SB-29 (1)

SB-28 (1) SB-28DX (1) SB-27 (1) SB-26 (1) SB-25 (1)

SB-24 (1) SB-23 (4) SB-22 (6) SB-22s (6) SB-21 (4)

SB-20 (9) SB-17 (4) SB-16 (4) SB-15 (4) SB-14 (1)

SB-11 (1) SB-140 (1)

In multiple flash operation, if the electronic current in the synchro circuit

exceeds a certain level, you man not be able to take a second shot after taking

the first one. In this case, turn off each of the Speedlights once or turn the

master flash unit off and disconnect it from the camera. This resets the circuits

so that you can resume shooting.

Technical Operation

Master

flash unit

SB-50DX (E) 02.12.9 2:33 PM Page 54

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nikon SB 50DX Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nikon SB 50DX

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info