Bedienungsanleitung Nilfisk AERO 26-01 X (Seite 14 von 24) (Englisch)

761685

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

*) Optional accessories / Option depending on model

Original instruction

double-insulated appliance must be identical to the

parts they replace. A double insulated appliance is

marked with the words “DOUBLE INSULATION” or

“DOUBLE INSULATED.” The symbol (square within

a square) may also be used on the product.

The machine is equipped with a specially designed

cord which if damaged, must be replaced by a cord

of the same type. This is available at authorised

service centres and dealers and must be installed by

trained personnel.

1.9.1 Only applicable to UK.

Please read these essential instructions

These instructions have been prepared with safety

and efficiency paramount.

The machine operator must be trained by a suit-

ably qualified instructor and must understand these

instructions for use, and be made aware of any rel-

evant regulations and legislation in force at the time

of use.

1.9.2 Electrical connections

CAUTION

DOUBLE-INSULATED MACHINES -

IMPORTANT:

This 240 volt 50 Hz. machine are fitted with a

13 amp. 3 pin moulded plug. The plug is fit-

ted with a 13 amp. detachable fuse. The cor-

rect replacement for the fuse is identified by

marking or colour coding. Only fuses that are

ASTA approved to BS 1362 should be fitted.

Never use the plug without the fuse cover fit-

ted. Replacement fuse covers are available at

any electrical retail outlet.

If the available socket outlet is not suitable for the

plug supplied, the plug must be cut off and an ap-

propriate plug fitted. The plug thus cut off MUST BE

DESTROYED for safety reasons before being dis-

posed of.

Machines built for other voltages and frequencies

are not normally supplied with a fitted plug.

If it is necessary to fit a plug, the wires in this power

supply cord are coloured in accordance with the fol-

lowing code:

1.9.3 Blue-neutral brown-live

TO CONNECT THE NEW PLUG:

If using a three-pin plug, do

not make any connection to

the the terminal in the plug

which is marked with the let-

ter ‘E’ or by the safety earth

symbol or coloured green or

green & yellow.

The blue wire must be connected to the terminal in

the plug which is marked with the letter ‘N’ or is col-

oured black or blue.

The brown wire which must be connected to the ter-

minal in the plug which is marked with the letter ‘L’ or

is coloured red or brown.

If the plug to be fitted does not conform to the above

notation then consult a qualified electrician.

2 Risks

2.1 Electrical components

DANGER

The upper section of the vacuum cleaner con-

tains live components.

Contact with live components leads to serious

or even fatal injuries.

• Never spray water on to the upper section

of the vacuum cleaner.

DANGER

Electric shock due to faulty mains connecting

lead.

Touching a faulty mains connecting lead can

result in serious or even fatal injuries.

• Do not damage the mains power lead

(e.g. by driving over it, pulling or crushing

it).

• Regularly check whether the power cord

is damaged or shows signs of ageing.

• If the electric cable is damaged, it must be

replaced by an authorized Nilfisk distribu-

tor or similar qualified person in order to

avoid a hazard.

• In no circumstances should the power

supply cord be wrapped around fingers or

any part of the operators person.

CAUTION

Appliance socket.*

The appliance socket is only designed for the

purposes defined in the operating instructions.

The connection of different appliances can re-

sult in damage.

• Prior to plugging in an appliance, always

switch off the vacuum cleaner and the ap-

pliance that is to be connected.

• Read the operating instructions to the ap-

pliance to be connected and observe the

safety notes contained in these.

CAUTION

Damage due to unsuitable mains voltage.

The appliance can be damaged as a result of

being connected to an unsuitable mains volt-

age.

• Ensure that the voltage shown on the rat-

ing plate corresponds to the voltage of the

local mains power supply.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nilfisk AERO 26-01 X Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nilfisk AERO 26-01 X

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info