Bedienungsanleitung Nilfisk AERO 26-21 (Seite 16 von 24) (Englisch)

761686

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

*) Optional accessories / Option depending on model

Original instruction

when the maximum liquid level is reached.

You will hear a noticeable change of the

sound from the motor and notice that the suc-

tion power decreases. When this occurs,

switch the machine off. Disconnect the ma-

chine from the socket. Never pick up liquid

without the float body in place.

3.4 Emptying after wet pick-up

Before emptying the container, unplug the vacuum

cleaner. Disconnect the hose from the inlet by pulling

out the hose. Release the latch by pulling them out-

wards so that the motor top is released. Open up the

motor top from container. Always empty and clean

the container and the float system after picking-up

liquids. Never pick up liquid without the float system

and filter installed in the machine.

Empty by tilting the container backwards and pour

the liquids into a floor drain or similar.

Put back the motor top to the container. Secure the

motor top with the latches.

3.5 Emptying after dry pick-up

Remove the electrical plug from the socket before

emptying after dry pick-up. Check the filters and

dustbag regularly. Release the latch by pulling them

outwards so that the motor top is released. Open up

the motor top from container.

Cartridge filter: To clean the filter you can either

shake, brush or wash it. Wait until it is dry before you

reuse it.

Dustbag: check bag to ensure the fill factor. Re-

place dust bag if necessary. Remove the old bag.

The new bag is fitted by passing the carboard piece

with the rubber membrane through the vacuum inlet.

Make sure that the rubber membrane is passing past

the heightening at the vacuum inlet.

After emptying: Close motor top to the container and

secure the motor top with the latches. Never pick up

dry material without cartridge filter and dustbag fitted

in the machine. The suction efficiency of the vacuum

cleaner depends on the size and quality of the filter

and dust bag. Therefore - use only Original filter and

dust bags.

3.6 Push&Clean

The machine is equipped with a semi automatic filter

cleaning system. Push&Clean. The filter cleaning

system must be actuated latest when the vacuum-

ing performance is no longer sufficient. Regular use

of the filter cleaning feature increases the tool life of

the filter.

4 After using the cleaner

4.1 After use

Remove the plug from the socket when machine is not

in use. Wind up the cord starting from the machine. The

power cord can be wound up around the motor top or at

the container. Some variants have special storage places

for accessories.

4.2 Transport

• Before transporting the dirt tank, close all the locks.

• Do not tilt the cleaner if there is liquid in the dirt tank.

• Do not use a crane hook to lift the cleaner.

4.3 Storage

• Store the appliance in a dry place, protected from rain

and frost.

• The machine shall be stored indoors only.

• Wet filters and the interior part of the liquid container

shall be dried before storage.

4.4 Recycling the cleaner

Make the old cleaner unusable.

1. Unplug the cleaner.

2. Cut the power cord.

3. Do not discard of electrical appliances with household

waste.

Equipment marked with the crossed-out wheeled

bin symbol indicates that used electrical and elec-

tronic equipment should not be discarded togeth-

er with unseparated household waste. To avoid negative

effects on human health and the environment the equip-

ment must be collected separately at the designated col-

lection points.

Users of electrical and electronic household equipment

must use the municipal collection schemes. Please note

that commercially used electrical and electronic equip-

ment, shall not be disposed of via municipal collection

schemes. We will be pleased to inform you about suitable

disposal options.

5 Maintenance

5.1 Regular servicing and inspection

Regular servicing and inspection of your machine must be

carried out by suitably qualified personnel in accordance

with relevant legislation and regulations. In particular, elec-

trical tests for earth continuity, insulation resistance, and

condition of the flexible cord should be checked frequently.

In the event of any defect, the machine MUST be with-

drawn from service, completely checked and repaired by

an authorized service technician.

5.2 Maintenance

Remove the plug from the socket before performing main-

tenance. Before using the machine make sure that the fre-

quency and voltage shown on the rating plate correspond

with the mains voltage.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nilfisk AERO 26-21 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nilfisk AERO 26-21

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info