Bedienungsanleitung Nilfisk-ALTO AERO 26 (Seite 16 von 228) (Englisch)

608911

Zoom out

Zoom in

Vorherige Seite

1/228

Nächste Seite

Optional accessories / Option depending on model

Original instruction

Dustbag: check bag to ensure the fill factor. Re-

place dust bag if necessary. Remove the old bag.

The new bag is fitted by passing the carboard piece

with the rubber membrane through the vacuum inlet.

Make sure that the rubber membrane is passing past

the heightening at the vacuum inlet.

After emptying: Close motor top to the container and

secure the motor top with the latches. Never pick up

dry material without cartridge filter and dustbag fitted

in the machine. The suction efficiency of the vacuum

cleaner depends on the size and quality of the filter

and dust bag. Therefore - use only Original filter and

dust bags.

3.6 Push & Clean

The machine is equipped with a semi automatic filter

cleaning system. Push & Clean. The filter cleaning

system must be actuated latest when the vacuum-

ing performance is no longer sufficient. Regular use

of the filter cleaning feature increases the tool life of

the filter.

4 After using the cleaner

4.1 After use

Remove the plug from the socket when machine is

not in use. Wind up the cord starting from the ma-

chine. The power cord can be wound up around the

motor top or at the container. Some variants have

special storage places for accessories.

4.2 Transport

• Before transporting the dirt tank, close all the

locks.

• Do not tilt the cleaner if there is liquid in the dirt

tank.

• Do not use a crane hook to lift the cleaner.

4.3 Storage

• Store the appliance in a dry place, protected

from rain and frost.

• The machine shall be stored indoors only.

4.4 Recycling the cleaner

Make the old cleaner unusable.

1. Unplug the cleaner.

2. Cut the power cord.

3. Do not discard of electrical appliances with

household waste.

As specified in European Directive 2012/19/EC

on old electrical and electronic appliances,

used electrical goods must be collected sepa-

rately and recycled ecologically.

5 Maintenance

5.1 Regular servicing and inspection

Regular servicing and inspection of your machine must be

carried out by suitably qualified personnel in accordance

with relevant legislation and regulations. In particular, elec-

trical tests for earth continuity, insulation resistance, and

condition of the flexible cord should be checked frequently.

In the event of any defect, the machine MUST be with-

drawn from service, completely checked and repaired by

an authorized service technician.

5.2 Maintenance

Remove the plug from the socket before performing main-

tenance. Before using the machine make sure that the fre-

quency and voltage shown on the rating plate correspond

with the mains voltage.

The cleaner is designed for continuous heavy work. De-

pending on the number of running hours – the dust filter

should be renewed. Keep the vacuum cleaner clean with a

dry cloth, and a small amount of spray polish.

For details of after sales service contact your dealer

or Nilfisk-ALTO service representative responsible for your

country. See reverse of this document.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nilfisk-ALTO AERO 26 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nilfisk-ALTO AERO 26

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info