Bedienungsanleitung Nilfisk-ALTO Neptune E (Seite 5 von 17) (Englisch)

493197

Zoom out

Zoom in

Vorherige Seite

1/17

Nächste Seite

english

Accessories / model variants

NEPTUNE E

jet must not be directed at

persons, animals, live electri-

cal equipment or the cleaner

itself.

Wear appropriate protective

clothing and eye protection.

Do not direct the jet towards

yourself or towards other per-

sons in order to clean clothes or

footwear.

During operation of the cleaner,

recoil forces are produced at the

gunvalve and spray lance and,

when the spray lance is held at

an angle, a torque is also created.

The gunvalve and spray lance-

must therefore be held ﬁ rmly in

both hands.

Do not use the cleaner when

other people without protective

clothing are in the working area.

Check that cleaning will not

result in dangerous substances

(e.g. asbestos, oil) being washed

off the object to be cleaned and

harming the environment.

Do not clean delicate parts

made of rubber, fabric, etc. with

the 0° jet. Keep some distance

between high pressure nozzle

and surface in order to prevent

the surface from damage.

Do not use the high-pressure

hose for lifting loads.

NOTE!

The maximum permissible work-

ing pressure and temperature

are printed on the high-pressure

hose.

Do not use the cleaner if the

power cord or high-pressure

hose is damaged.

Ensure adequate air circulation.

Do not cover the cleaner or oper-

ate it in inadequately ventilated

rooms!

Store the cleaner where

it will not be exposed

to frost!

Never operate the cleaner with-

out water. Even brief shortages of

water result in severe damage to

the pump seals.

Operation

Keep cabinet and service door

closed during operation.

Connect the machine directly to

a plug socket. Do not use exten-

sion cords.

Do not damage the power cord

(e.g. by driving over it, pulling or

crushing it).

Disconnect the power cord by

grasping the plug only (do not

pull or tug the power cord).

Electrical equipment

CAUTION!

Never spray electrical equip-

ment with water: risk of elect-

trical shock and short-circuit.

The cleaner may only be con-

nected to a correctly installed

plug socket.

Switching on the cleaner may

cause voltage ﬂ uctuations.

Voltage ﬂ uctuations should not

occur if the impedance at the

transfer point is less than 0.15

If in doubt ask your local electric-

ity supplier.

Maintenance and repair

CAUTION!

Always remove the plug from

the power supply before clean-

ing or carrying out mainte-

nance work on the cleaner.

Carry out only the maintenance

operations described in the op-

erating instructions. Use only

original Nilﬁ sk-Alto spare parts.

Do not make any technical

modiﬁ cations to the high-pres-

sure cleaner.

Ensure that the machine is

regularly serviced by authorized

Nilﬁ sk-Alto dealers in accordance

with the maintenace plan. Failure

to do so will void the warranty.

CAUTION!

High-pressure hoses, fittings

and couplings are important for

the safety of the cleaner. Use

only high-pressure parts ap-

proved by the manufacturer!

The power cord must not differ

from the version speciﬁ ed by the

manufacturer and may only be

changed by an electrician.

Please contact your local au-

thorized Nilﬁ sk-Alto equipment

distributor for all other mainte-

nance or repair needs!

Testing

The cleaner conforms to the Ger-

man „Guidelines for Liquid Spray

Jet Devices“. The high-pressure

cleaner must be subjected to a

safety examination in accord-

ance with the „Accident Preven-

tion Regulations for Working

with Liquid Spray Jet Devices“

as required, but at least every

12 months, by an authorised

inspector.

After all repairs or modiﬁ cations

to electrical equipment, the pro-

tective conductor resistance, the

insulation resistance and the leak-

age current must be measured.

Furthermore, a visual inspection

of the mains power lead, a volt-

age and current measurement

and a function test must be car-

ried out. Our after-sales service

technicians are at your disposal

as authorised inspectors.

The complete „Accident Preven-

tion Regulations for Working

with Liquid Spray Jet Devices“

are available from the Carl Hey-

manns Verlag KG, Luxemburger

Strasse 449, 50939 Cologne or

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nilfisk-ALTO Neptune E Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nilfisk-ALTO Neptune E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info