Bedienungsanleitung Nilfisk-ALTO NEPTUNE SB (Seite 5 von 25) (Englisch)

609103

Zoom out

Zoom in

Vorherige Seite

1/25

Nächste Seite

NEPTUNE SB

Options / model variants

Original instructions

sons, animals, live electrical

equipment or the cleaner itself.

Wear appropriate protective

clothing and eye protection.

Do not direct the jet towards

yourself or towards other per-

sons in order to clean clothes or

footwear.

During operation of the cleaner,

recoil forces are produced at the

gunvalve and spray lance and,

when the spray lance is held at

an angle, a torque is also cre-

ated. The gunvalve and spray

lancemust therefore be held

ﬁ rmly in both hands.

Do not use the cleaner when

other people without protective

clothing are in the working area.

Check that cleaning will not result

in dangerous substances (e.g.

asbestos, oil) being washed off

the object to be cleaned and

harming the environment.

Do not clean delicate parts

made of rubber, fabric, etc. with

the 0° jet. Keep some distance

between high pressure nozzle

and surface in order to prevent

the surface from damage.

Do not use the high-pressure

hose for lifting loads.

NOTE!

The maximum permissible work-

ing pressure and temperature

are printed on the high-pressure

hose.

Do not use the cleaner if the

power cord or high-pressure

hose is damaged.

Ensure adequate air circulation.

Do not cover the cleaner or oper-

ate it in inadequately ventilated

rooms!

Store the cleaner where

it will not be exposed to

frost or use antifreeze

liquid!

Never operate the cleaner with-

out water. Even brief shortages of

water result in severe damage to

the pump seals.

Operation

Keep cabinet and service door

closed during operation.

CAUTION!

Unsuitable extension cords

can represent a source of dan-

ger. Always unwind cord from

the reels completely to prevent

the power cord overheating.

Connectors and couplings of

extension cords must be water-

tight.

Extension cords are not recom-

mended, however if necessaray

refer to the following recom-

mendations:

Cord length

Cross section

up to16 A up to 25 A

up to 20 m

(US: 30 ft)

(US: 50 ft)

(US: 75 ft)

ø1.5mm²

14 gauge

12 gauge

10 gauge

ø2.5mm²

12 gauge

10 gauge

not recom-

mended

20 to 50 m

ø2.5mm² ø4.0mm²

Do not damage the power cord

(e.g. by driving over it, pulling or

crushing it).

Disconnect the power cord by

grasping the plug only (do not

pull or tug the power cord).

CAUTION!

Unsuitable fuels (e.g. gasoline)

must not be used as they can

explode and catch ﬁ re.

Use clean fuel only, free of mois-

ture and contamination. Contact

your dealer for fuel source and

type recommendations.

If the machine is to be oper-

ated at fuel stations or in other

potentially hazardous areas, the

machine may only be employed

outside the hazard areas deﬁ ned

in the German „Technical Guide-

lines for Inﬂ ammable Fluids“ ap-

plicable at the point of use due

to the potential explosion hazard

posed by the burner.

If the machine is to be operated

indoors, the local building regu-

lations must be observed for the

discharge of the exhaust fumes

into the atmosphere. Ensure an

adequate supply of fresh air.

If the machine is to be connected

to a ﬂ ue gas stack, then local

building regulations must be ob-

served. We will be glad to provide

tips for connection systems, on

request.

CAUTION!

Beware of hot water and

steam discharge up to

150

C when operating in

steam stage.

CAUTION!

Do not touch or cover the

exhaust. Risk of burns

and ﬁ re.

Do not touch, cover or place

hose or cord over the chimney.

Danger for persons, risk of

overheating and ﬁ re.

Electrical equipment

CAUTION!

Never spray electrical equip-

ment with water: risk of elect-

trical shock and short-circuit.

The cleaner may only be con-

nected to a correctly installed

plug socket.

Switching on the cleaner may

cause voltage ﬂ uctuations.

Voltage ﬂ uctuations should not

occur if the impedance at the

transfer point is less than 0.15

If in doubt ask your local electric-

ity supplier.

Maintenance and repair

Warning

The cleaner must be discon-

nected from its power source

during cleaning of the machi-

ne, maintenance, when repla-

cing parts or converting the

machine to another function.

Carry out only the maintenance

operations described in the

operating instructions. Use only

original Nilﬁ sk-ALTO spare parts.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nilfisk-ALTO NEPTUNE SB Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nilfisk-ALTO NEPTUNE SB

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info