Bedienungsanleitung Nilfisk-ALTO POSEIDON 2-26 PORTABLE (Seite 5 von 13) (Englisch)

493185

Zoom out

Zoom in

Vorherige Seite

1/13

Nächste Seite

45Original instructions

POSEIDON 2 PORTABLE

must not be dire-

cted at persons,

animals, live ele-

ctrical equipment

or the washer

itself.

Wear appropriate

protective clothing and eye pro-

tectors.

Do not direct the jet towards

yourself or towards other per-

sons in order to clean clothes

or footwear.

During use, appropri-

ate hearing protection

has to be used.

During operation of the washer,

recoil forces are produced at

the spraying device and, when

the spray lance is held at an

angle, a torque is also crea-

ted. The spraying device must

therefore be held firmly in both

hands.

Operator and anyone in im-

mediate vicinity of the site of

cleaning should take action

to protect himself from being

struck by debris dislodged

during operation.

Check that cleaning will not

result in dangerous substan-

ces (e.g. asbestos, oil) being

washed off the object to be

cleaned and harming the en-

vironment.

WARNING!

This machine has been desig-

ned for use with the cleaning

agent supplied or recommen-

ded by the manufacturer. The

use of other cleaning agents or

chemicals may adversely affect

the safety of the machine.

Risk of explosion – Do not spray

flammable liquids.

Do not clean delicate parts

made of rubber, fabric, etc. with

the 0° jet. Keep some distance

between high pressure nozzle

and surface in order to prevent

the surface from damage.

Do not use the high-pressure

hose for lifting loads.

NOTE!

The specifications of the

high-pressure hose (max. per-

missible pressure and tempe-

rature) are printed on the hose.

Do not continue to use the

washer if the mains power lead

or high-pressure hose is dama-

ged.

Ensure adequate air circulati-

on. Do not cover the washer or

operate it in inadequately venti-

lated rooms!

Store the washer where it will

not be exposed to frost!

Never operate the washer

without water. Even brief shor-

tages of water result in severe

damage to the pump seals.

Water connection

This high pres-

sure washer is

only allowed to be

connected with

the drinking water

mains, when an appropriate

backﬂ ow preventer has been

installed, Type BA according to

EN 60335-2-79. The backﬂ ow

preventer can be ordered under

number 106411177,10641117

8,106411179,106411184. The

length of the hose between the

backﬂ ow preventer and the high

pressure washer must be at

least 12 metres (min diameter

3/4 inch) to absorb possible

pressure peaks. Operation by

suction (for example from a

rainwater vessel) is carried out

without backﬂ ow preventer. Re-

commended suction set: 61256.

As soon as water has ﬂ own

through the BA valve, this water

is not considered to be drinking

water any more.

Operation

CAUTION!

Unsuitable extension cords can

represent a source of danger.

Always unwind cord from the

reels completely to prevent the

power cord overheating.

Plugs and connectors of mains

power leads must be at least

splash water-proof.

WARNING!

Inadequate extension cables

can be dangerous. If an exten-

sion cable is used, it shall be

suitable for outdoor use, and

the connection has to be kept

dry and off the ground. It is rec-

ommended that this is accom-

plished by means of a cable

reel which keeps the socket at

least 60 mm above the ground

When using an extension cord,

check the minimum cross-sec-

tions of the cable:

Cable length

Cross section

<16 A <25 A

up to 20 m

ø1.5mm² ø2.5mm²

20 to 50 m

ø2.5mm² ø4.0mm²

Do not damage the mains

power lead (e.g. by driving over

it, pulling or crushing it).

Disconnect the power cord by

pulling the plug only (do not pull

or tug the power cord).

Electrical equipment

CAUTION!

Never spray electrical equip-

ment with water: danger for

persons, risk of short-circuiting.

The washer may only be

connect ed to a correctly instal-

led plug socket.

Switching on the washer may

cause voltage fluctuations.

Voltage fluctuations should

not occur if the impedance at

the transfer point is less than

0.15. If in doubt, ask your lo-

cal electricity supplier.

Nilfisk-ALTO No. 301003191

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nilfisk-ALTO POSEIDON 2-26 PORTABLE Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nilfisk-ALTO POSEIDON 2-26 PORTABLE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info