Bedienungsanleitung Nilfisk-ALTO Poseidon 2 (Seite 63 von 188) (Dänisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

493183

Zoom out

Zoom in

Vorherige Seite

1/188

Nächste Seite

Poseidon 2

Original Instructions

agents or chemicals may

adversely affect the safety of

the appliance.

 To ensure the appliance

safety only use original spare

parts from the manufacturer

or approved by the manufac-

turer.

 High pressure hoses, ﬁ ttings

and couplings are important

for the safety of the appli-

ance. Only use hoses, ﬁ ttings

and couplings recommended

by the manufacturer.

 Do not use the appliance

if a supply cord or impor-

tant parts of appliance are

damaged, e.g. safety device ,

high pressure hose and trig-

ger gun.

 Remove the plug from the

socket outlet during cleaning

or maintenance and when

replacing parts or converting

the machine to another func-

tion.

 Appropriate ear protection

must be used.

 Never use the machine in

an environment where there

could be a danger of explo-

sion. If any doubt arises,

please contact the local

authorities.

 It is not allowed to clean

asbestos- containing surfaces

with high pressure.

 Do not spray ﬂ ammable

liquids.

 Always switch off the mains

disconnecting switch when

leaving the machine unat-

tended.

This high pressure washer

must not be used at tempera-

tures below 0°C.

WARNING!

Inadequate extension cables

can be dangerous. If an exten-

sion cord is used, it shall be

suitable for outdoor use, and

the connection has to be kept

dry and off the ground. It is

recommended that this is ac-

complished by means of a ca-

ble reel which keeps the socket

at least 60 mm above the

ground. Cables on reels should

always be completely unwound

to prevent the cable from over-

heating.

Extension cables should com-

ply with the below-mentioned

requirements for length and

cable dimensions.

1.0 mm² max. 12.5 m

1.5 mm² max. 20 m

2.5 mm² max. 30 m

Only POSEIDON 2-17 X:

2.0 mm² máx. 12.5 m

2.5 mm² máx. 20 m

 If the electric cable is

damaged, it must be re-

placed by the manufacturer

or his service agent or simi-

larly qualiﬁ ed person in order

to avoid a hazard.

Mains power connection

The following should be ob-

served when connecting the

high pressure washer to the

electric installation:

 Only connect the machine to

an installation with earth con-

nection.

 The electric installation shall

be made by a certiﬁ ed elec-

trician and comply with IEC

60364-1.

 It is strongly recommended

that the electric supply to this

machine should include a re-

sidual current device (GFCI).

Water connection

Connection to the public mains

according to regulations.

Machine not suit-

able for connec-

tion to the potable

water mains.

This high pressure washer is

only allowed to be connected

with the drinking water mains,

when an appropriate backﬂ ow

preventer has been installed,

Type BA according to EN 1717.

The length of the hose between

the backﬂ ow preventer and the

high pressure washer must be

at least 10 metres to absorb

possible pressure peaks (min

diameter ½ inch).

Operation by suction (for

example from a rainwater ves-

sel) is carried out without back-

ﬂ ow preventer.

As soon as water has ﬂ own

through the BA valve, this water

is not considered to be drinking

water any more.

IMPORTANT! Only use wa-

ter without any impurities. If

there is a risk of silt, sand or

sediment in the inlet water (i.e.

from your own well), an addi-

tional ﬁ lter should be mounted.

Safety devices

Locking device on spray handle

(7a) (see illustration at the end

of this manual):

The spray handle features a

locking device. When the button

is activated, the spray handle

cannot be ope rated.

Thermal sensor:

A thermal sensor protects the

motor against overloading. The

machine will restart after a few

minutes when the thermal sen-

sor has cooled.

Pressure safety device

An integrated hydraulic safety

valve protects the system from

excessive pressure.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nilfisk-ALTO Poseidon 2 Seite 63

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nilfisk-ALTO Poseidon 2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info