Bedienungsanleitung Nilfisk-ALTO SC UNO 7 (Seite 9 von 19) (Englisch)

609300

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

9Original Instructions

SC UNO/DUO

let the water run at each outlet point of the pipeline at

turns.

When con nect ing the high pressure hose directly to the

ma chine, the sys tem should be vented by starting the

pump and ac ti vat ing the trigger of the spray handle wit-

hout having attached the spray lance.

SC DUO:

In the case of a recently installed sys tem, or if the pipeline

and the pump have been emptied in any other way, the

system should be vented as follows:

1. At ﬁ rst start pump no. 1 and let the water run from an

outlet point of the pipeline.

When con nect ing the high pressure hose directly to

the ma chine, activate the trigger of the spray handle

without having attached the spray lance.

Let the water run until all air has escaped from the

pump (even water ﬂ ow).

2. Stop pump no. 1. Then start pump no. 2 and let the

water run from an outlet point of the pipeline.

When con nect ing the high pressure hose directly to

the ma chine, activate the trigger of the spray handle

without having attached the spray lance.

Let the water run until all air has escaped from the

pump (even water ﬂ ow).

3. Vent the pipeline by starting one pump and then let the

water run at each outlet point of the pipeline at turns

until all air has escaped from the system.

B - Operation

B.1 Connections

B.1.1 High pressure hose - directly on the machine

The Nilﬁ sk high pressure hose with imprinted max. wor-

king pressure and temperature should be attached to the

outlet connection of the machine (6) by the quick coupling

(a).

Max.extension hose: 50 m.

Danger of scalding!

Never dismount high pressure hoses at water tempera-

tures above 50°C.

IMPORTANT: Prior to dismount-ing of the high pressure

hose the machine should be stopped and the shut-off

cock closed. Then activate the trigger of the spray handle

to relieve the high pres sure hose of pressure.

B.1.2 High pressure hose - to outlet point

In the case of a pipeline with ﬁ xed outlet points the high

pressure hose with imprinted working pressure and

temperature should be attached to the nipple of the high

pres sure cock (1) by the quick coupling (2). Upon attach-

ment turn the handle of the high pressure cock (3) to

open position.

Danger of scalding!

Never dismount high pressure hoses at water tempera-

tures above 50°C.

IMPORTANT: Prior to dismounting of the high pressure

hose or when changing to another outlet point the high

pressure cock should be care ful ly closed. Then activate

the trigger of the spray handle to relieve the high pressure

hose of pressure.

B.1.3 Spray handle - accessories

1. Pull forward the quick coupling trigger (1) of the spray

handle.

2. Insert the nipple of the spray lance (2) in the quick

coupling and release the trigger.

3. Pull forward the spray lance or any other accessory to

ensure correct mounting before starting the machine.

NOTE!

Clean nipple of any impurities each time the spray lance

has been dismounted.

B.1.4 Application of detergents (external)

If you want to apply detergents or disinfectants these

should be dosed to the water through an injector. In con-

junction with the injector it may be ad van ta geous to use a

wall rack on which spray lances, 2 pcs. of 25 l containers

as well as 10 m high pressure hose can be placed.

Below you will ﬁ nd various types of outlet points with

injectors.

1. Outlet point with detachable injector

To be attached to the quick coupling of the high pressure

cock.

To be used for dosing of low-foaming detergents or disin-

fectants.

Dosage 1-8%.

2. Outlet point with detachable foam injector

To be attached to the quick coupling of the high pressure

cock.

To be used in conjunction with foam lance for application

of high-foaming de ter gents or disinfectants.

Dosage 1-5%.

3. Outlet point with cleaning trolley and foam injector

To be attached to the quick coupling of the high pressure

cock.

To be used in the same way as “Outlet point with detach-

able foam injector”.

Makes it possible to place 4 spray lances, 2 pcs. of 25 l

containers as well as 20 m high pressure hose.

B.2 Start

The shut-off cock on the water inlet should be open.

SC UNO:

Turn the main switch (2) to position - 1 -. Press the green

starting button (3).

SC UNO 5M-L: Switch main switch to position - I -).

Check on the pressure gauge (5) that a pressure is being

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nilfisk-ALTO SC UNO 7 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nilfisk-ALTO SC UNO 7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info