Bedienungsanleitung Nilfisk-ALTO Truck Booster (Seite 20 von 31) (Englisch)

609319

Zoom out

Zoom in

Vorherige Seite

1/31

Nächste Seite

TRUCK BOOSTER

Original Instructions

5.5 Detergents As standard the system is

delivered without a detergent

injector and the optional, factory

mounted, internal chemical

system.

If you want to use detergents

or disinfectants these should

be dosed through an external

injector (see section 4.1.5) or

through the pump (see section

4.1.6).

The most efﬁ cient cleaning

is reached with detergents in

conjunction with the high-pres-

sure cleaning. For that purpose

NILFISK-ALTO can offer you

a series of products specially

developed for high-pressure

cleaning, among other ﬁ elds

within:

• Cleaning of vehicles,

machines, stalls etc.

• Disinfection

• Degreasing of workpieces

• Descaling

The products are water-based,

without phosphates, and the

applied tensides (surface active

substances) comply with the

present requirements for easy

biodegradability.

Contact your Nilﬁ sk-ALTO

distributor for directions as to

which product(s) will fulﬁ ll your

requirements.

The method of application and

the dosage of the individual

products appear from the prod-

uct labels or the data sheet.

Low-foaming detergents are

applied through an injector and

under low pressure. A change

to cleaning under high-pressure

is effected by regulating from

»low pressure mode« to »high-

pressure mode« on the double

spray lance or by attaching a

high-pressure spray lance.

For foam cleaning you will have

to attach a special foam equip-

ment. Insert the suction hose

of the injector into the foam

detergent.

Attach the foam lance on the

spray handle and now you are

ready for foam application.

Upon the application open the

by-pass cock of the foam injec-

tor and replace the foam lance

by a spray lance, and you are

ready for cleaning.

General rules for addition of

detergents

Nilﬁ sk-ALTO cleaning equip-

ment can be used for all deter-

gents and disinfectants, which

are suitable for high-pressure

cleaning according to the

prescriptions of the supplier. (If

using external injector, sec-

tion 4.1.5, the pH-value should

be between 4 and 14. If using

addition of chemicals through

the high-pressure pump, sec-

tion 4.1.6, the pH-value MUST

be between 5.5 and 8.5). Acid

and lye should not be applied in

a concentrated form.

Carefully observe the prescrip-

tions and guidelines of the

supplier, also the rules concern-

ing safety clothing and drainage

facilities.

Detergents, which are not

exactly prescribed for use in

conjunction with high-pressure

cleaning, must only be used

upon a previous approbation

from Nilﬁ sk-ALTO and the sup-

plier.

The use of Nilﬁ sk -ALTO deter-

gents ensures that machines,

accessories and detergents

match, which is the condition of

an optimal solution of a cleaning

task.

Nilﬁ sk -ALTO can offer you a

wide range of efﬁ cient agents

for cleaning and disinfection.

The products are composed

of substances, which combine

efﬁ ciency and environmental

considerations at one and the

same time.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nilfisk-ALTO Truck Booster Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nilfisk-ALTO Truck Booster

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info