Bedienungsanleitung Nilfisk C 120.7 (Seite 2 von 14) (Englisch)

728800

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

Original Instructions2

The instruction consists of 3 parts. Part 1:3 Safety

Instructions. Part 2:3 User Guide. Part 3:3 Technical

Data and Declaration.

Part 1:3 - Safety Instructions

Before rst use of the machine, read the

instructions carefully. Save instructions for

later use.

Safety instructions marked with this symbol

must be observed to prevent personal injury

or serious damage to property.

WARNING

This machine has been designed for use with

cleaning agents supplied or recommended by Nilsk.

The use of other cleaning agents or chemicals may

adversely aect the safety of the machine.

High pressure jets can be dangerous if

subject to misuse. The jet must not be directed

at persons, live electrical equipment or the

machine itself.

Do not use the machine within range of persons

unless they wear protective clothes.

Do not direct the jet against yourself or others in

order to clean footwear.

Risk of explosion – Do not spray ammable liquids.

High pressure washers shall not be used by children

or untrained personnel.

High pressure hoses, ttings and couplings are

important for the safety of the machine. Use only

hoses, ttings and couplings recommended by Nilsk.

To ensure machine safety, use only original spare

parts recommended by Nilsk.

Water that has own through back-ow preventers

is considered to be non-potable.

Don’t use the machine if a supply cord or important

parts of the machine are damaged, e.g. safety devices,

high pressure hoses, trigger gun.

Inadequate extension cords can be dange rous.

If an extension cord is used, it shall be suitable for

outdoor use, and the connection has to be kept dry

and o the ground. It is recommended that this is

accomplished by a cord reel which keeps the socket

at least 60 mm above the ground.

Switch o and unplug the machine when leaving

it unattended, when nished using it or when converting

it to another function, when doing repair and

maintenance.

During use of high pressure washers, aerosols

may be formed. Inhalation of aerosols can be hazardous

to health, for the protection against aerosols a

respiratory mask of class FFP 2 or equivalent may

be needed, depending on the cleaning environment.

Intended Use and Terms of Liability

• The C-, D-, E- and P-series have been developed

for domestic cleaning pur poses only and for use

in an upright position. Any other use is considered

as improper use.

•

A high pressure washer operates with dierent

levels of pressure and cleaning detergents for

various cleaning tasks and results. Always follow

instructions on detergents for use, emergency

and disposal.

•

Do not operate the machine at temperatures

below 0°C. Never start a frozen machine, never

use it indoor and never cover it during use. This

is considered improper and wrongful use. Use of

wrongful pressure, detergent and/or applications

may cause damage to machine, surfaces, material

and devices.

All of the above is considered improper and wrongful

use. Nilsk accepts no liability for any damage resulting

from any improper or wrongful use.

Please refer to our website at www.get-started.nilsk.

com for further instructions and information on use,

emergency and disposal.

Safety devices and their functioning

The machine automa tically stops when releasing the

trigger. The machine will start again when reactivating

the trigger. The spray handle features a locking device.

When activated, the spray handle cannot be operated.

The machine has an automatic self-resetting thermal

protector. If the machine is overheated, the thermal

protector will cut the power supply. In this case, wait

for the machine to cool down. An integrated hydraulic

safety valve protects the system from excessive

pressure.

Precautions

The electric supply connection shall be made by a

qualied electrician and comply with IEC 60364-1.

It is recommended that the electric supply to this

machine should include either a residual current

device that will interrupt the supply if the leakage

current to earth exceeds 30 mA for 30 ms or a device

that will prove earth circuit.

•

Use motor start/delayed fuses with characteristic D

according to IEC 947-2 or corresponding standards

outside IEC.

•

If the supply cord is damaged, it must be replaced by

an authorized Nilsk distributor or similar qualied

person in order to avoid a hazard.

•

No actions needed for adjusting machines marked

with dual voltage and frequency.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nilfisk C 120.7 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nilfisk C 120.7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info