22361200. Replacing the pair of ratchet for dust cover A-0.6.5
15
ASSEMBLY INSTRUCTIONS GM 400 SERIES
Instruction No. 82361300/00-08
To be performed by a skilled
or instructed person only !
Converting from black ratchet to
the dark grey version
Q Open the accessory cover
until it stops and continue with a
little pressure by hand until it slides
free of the hinges and remove it.
Open the dust cover lid.
W Push down the cable release
button (a) and press by hand the
dust cover button sideways (b) to
release it, and lift it up (c).
E Unscrew the two screws with
a screwdriver type Pozidrive no.2
and remove with the steel plate.
RTRemove the two ratchets from
the spring and replace the two
dark grey versions into the spring.
Y When replacing the steel plate
be sure that the hooks on the
ratchets in both sides are in mesh
with hole in the steel plate.
Press down the steel plate and
replace the two screws with ade-
quate force.
To replace the dust cover button,
push down the cable release but-
ton and press it by hand sideways
to fit the two tabs.
Replace the accessory cover and
lock the dust cover.
a
1
2
b
c
YT
Q
E
W
R
