Bedienungsanleitung Nilfisk IVB2000 (Seite 38 von 72) (Deutsch, Englisch, Holländisch, Französisch)

20231

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

USER MANUAL

2 32401131(1)2005-03 A

1Introduction

The operational safety of the vacuum cleaner is

entrusted to those who work with it every day.

This manual has been compiled in order to inform

operators about the precautions and regulations to

ensure their safety and allow the vacuum cleaner to

remain in good working condition.

Before starting the vacuum cleaner, the personnel

authorised to work with it, must become thoroughly

familiar with the contents of this Manual.

Keep the manual near the vacuum cleaner, store it in a

safe and dry place, away from direct sunlight and at

hand for future reference.

This Manual reflects the state-of-the-art technology at

the time of sale and cannot be considered adequate if

modifications are subsequently made.

The manufacturer reserves the right the update the

production range and relative manuals at any time

without being obliged to update previous vacuum

cleaners and manuals.

In case of doubt, consult your nearest Nilfisk-Advance

Service Center.

1.1 Description

This vacuum cleaner has been especially designed to

collect shavings, scraps, dust and various waste

materials.

The vacuum cleaner is mounted on tough rubber

wheels, two of which are castors, in order to make it

easy to handle. Besides, the vacuum cleaner is

equipped with brakes, to safely stop it in the place of

use.

The vacuum cleaner can be used in commercial

environments, such as hotels, schools, hospitals,

factories, shops and offices.

The vacuum cleaner has been designed and

manufactured to operate in industrial environments,

where it can be used for normal cleaning operations.

The collected material is subjected to a centrifugal

action inside the container where the coarser items fall

down, owing to their weight.

The air passes through a filtering surface where the

larger solid particles are retained.

The filter clogging sensor (vacuum switch) installed on

the vacuum cleaner detects the vacuum created by the

filter and warns the operator when the suction power is

excessively reduced.

Nilfisk-Advance offers vacuum cleaners that can work

with fluids. Vacuum cleaners with absolute filters are

also available.

The high quality of the vacuum cleaner is guaranteed

by the strictest tests. Materials and components are

subjected to a series of strict inspections during the

various production phases in order to ascertain

compliance with the established high qualitative

standards.

WARNING!

Read this Manual before operating and

servicing the vacuum cleaner.

Comply with the instructions and

warnings shown on the plates.

Failure to do so could cause personal

injuries and even death.

Check that the plates are always legible.

Otherwise, replace them. In case of

emergency, turn off the main power

switch and disconnect the vacuum

cleaner plug.

NOTE

Read this manual carefully before using the

vacuum cleaner.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nilfisk IVB2000 Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nilfisk IVB2000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info