Bedienungsanleitung Nilfisk Supreme LCD (Seite 48 von 89) (Dänisch, Schwedisch, Finnisch)

586824

Zoom out

Zoom in

Vorherige Seite

1/89

Nächste Seite

46 Originlal Instructions

6.3 Supreme LCD Display

The Supreme LCD model has a display giving information

about the machine, Fig. 21.

Speed level

When the start button is pushed or the hose is

connected to the wall socket, the display will turn on

and show the speed level.

Dust bag/bag ﬁ lter indicator

When the dust bag/ﬁ lter symbol starts to ﬂ ash dur-

ing operation, the cleaner tells you that it is almost time

to clean the bag ﬁ lter and replace the dust bag. When it

is time to do so, symbol will be lit continuously. The dust

bag/ﬁ ler symbol will be lightened after every 20 operation

hours of the cleaner at the latest. If the symbol is lit, do

like this: Turn oﬀ the cleaner by the hose handle (remote

versions) or remove the suction hose from the wall inlet

(manual hose versions) or by pushing the on/oﬀ switch

on the display. Then check if the bag ﬁ lter/dust bag is

clogged. Replacement is described in chapters 7.1, 7.2,

7.3 and 7.4.

In switched oﬀ mode, re-set run time counter by holding

the start/stop button down until the dust bag indicator

goes out (after approx. 5 sec.).

Reduced airﬂ ow indicator - lit

The reduced airﬂ ow symbol on the display indi-

cates that the airﬂ ow through the vacuum cleaner

is reduced. After 30 seconds of operation with

reduced airﬂ ow, the vacuum motor will be shot down in or-

der to prevent damage to the motor. If the reduced airﬂ ow

symbol is lit and the motor has been shut down, do like

this: Check the bag ﬁ lter and dust bag (see chapters 7.1,

7.2, 7.3 and 7.4) to see if anything is blocking the airﬂ ow.

Remove the material causing the reduced airﬂ ow symbol

to indicate.

Service indicator

When the service symbol starts ﬂ ashing, the mo-

tor will run for one more hour before it stops/will

not start. The purpose of the service symbol is to inform

you that it is time to order service of the cleaner. When

the symbol is continuously lit, the run time counter in the

cleaner has counted that the allowed amount of run time

has passed. You must now contact an authorised service

workshop and let them perform a service of the cleaner

and to reset the run time counter.

Overheat indicator - ﬂ ashing

The overheat symbol indicates that the cleaner has

become overheated. The cleaner stops automati-

cally. Unplug the main power cord to reset the vacuum

cleaner and wait 5-10 minutes to allow the machine to

cool down. While you are waiting, check the hose, dust

bag and ﬁ lter to be sure that nothing is blocking the ﬂ ow

of air through the machine.

Signal indicator - ﬂ ashing

When the symbol is ﬂ ashing, the hose handle is out

of range and there is no connection to the cleaner.

The cleaner will automatically stop after 30 min. if

the hose handle or the cleaner has not been activated.

Fig. 21

Speed

Service

Dustbag/Filter

Wireless

Airflow

Temperature

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nilfisk Supreme LCD Seite 48

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nilfisk Supreme LCD

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info