Bedienungsanleitung Ninja BL682EU2 (Seite 28 von 93) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

716485

Zoom out

Zoom in

Vorherige Seite

1/93

Nächste Seite

54 55

ENGLISH

www.ninjakitchen.eu

Care & Maintenance

HOW TO STORE

Store the Nutri Ninja

Ninja

Blender Duo

™

with

AUTO-iQ

™

Technology upright with the blade assembly

inside the corresponding container with the lid secured

on top. Do not place anything on top. Store the rest

of the attachments in a safe place where they will not

be damaged and won’t cause harm.

Loosely wrap the

power cord around the motor base

NOTE:

Do not store blended or unblended ingredients in

the Nutri Ninja Cup with the blade assembly attached.

RESETTING THE MOTOR THERMOSTAT

Store the N

utri Ninja

Ninja

Blender System with

Auto-iQ

Technology

features a unique safety system

which prevents damage to the unit’s motor and

drive system should you inadvertently overload your

appliance. If the appliance is being overloaded,

the motor will stop. Allow the appliance to

cool for approximately 15 minutes. To reset the

appliance, follow the resetting procedure below:

Unplug the appliance from the electrical outlet.

Remove and empty the container and ensure that no

food is jamming the blade assembly.

Allow the appliance to cool for approximately 15

minutes.

Re-install the container onto the base and re-plug the

appliance into the electrical outlet.

Proceed to use the appliance as before making sure not

to exceed the recommended maximum capacities.

HOW TO CLEAN

CAUTION: Make sure that the motor base is

unplugged from the power source before inserting

or removing any attachment and before cleaning.

CAUTION: DO NOT immerse the motor base into

water or any other liquid.

1 Separate/remove all parts from each other.

2 Hand Washing:

Wash the containers, lids, blade

assemblies and attachments in warm, soapy water

When washing the blade assemblies, use a dish-washing

utensil with a handle to avoid direct hand contact with

blades. Handle blade assemblies with care to avoid

contact with sharp edges. Rinse and air dry thoroughly.

Dishwasher: The containers, lids, blade assemblies

and attachments are all dishwasher safe. The lids

and blade assemblies are top rack dishwasher safe.

Ensure that the blade assemblies are removed from the

containers before placing in the dishwasher.

WARNING: Handle the blade assemblies with care

when washing, as the blades are sharp. Contact

with the blades’ edges can result in laceration.

3 Wipe the motor base clean with a damp cloth

Please call customer service if any servicing needs to

be performed on the appliance at 0800 862 0453.

Troubleshooting Guide

PROBLEMS POSSIBLE REASONS & SOLUTIONS

Motor Doesn’t Start or Blade

Assembly Doesn’t Rotate.

Make sure the container is securely locked into the motor base.

Make sure the lid is securely on container in the correct position (align arrows).

The appliance is turned “Off”. Press the power button (

) to turn “On”.

Check that the plug is securely inserted into the electrical outlet.

Check the fuse or circuit breaker.

The unit has overloaded. The appliance will stop and the power light will ﬂash.

Unplug and wait approximately 15 minutes before using again.

The unit has overheated. Unplug and wait approximately 15 minutes before using again.

Check to make sure the unit is not overloaded.

Food is Unevenly Chopped.

Either you are chopping too much food at one time, or the pieces are not of even

size and processing smaller amounts per batch.

Food is Chopped Too Fine or is

Too Watery.

The food has been over processed. Use Auto-iQ

PULSE button for controlled

processing.

Food Collects On Lid or On the

Sides of the Container.

The mixture is too thick. Add more liquid.

You Cannot Achieve Snow

From Solid Ice.

Do not use ice that has been sitting out or has started to melt. Use ice straight

from the freezer.

Start with a few pulses and then go to a continuous blending cycle.

Motor Base Won’t Stick to

Counter or Tabletop.

Make sure surface and suction feet are wiped clean. Suction feet will only stick to

smooth surfaces. Suction feet WILL NOT stick on some surfaces such as, wood,

tile and non-polished ﬁnishes.

DO NOT attempt to use appliance when the motor base is stuck to a surface that

is not secure, (cutting board, platter, plates, etc.).

You get an “Err” Message.

Your Ninja

is able to detect which jar is on the base. You may be trying to use a

program that is not designed for the jar you have installed. The programs will light

up indicating which programs are available for each jar.

You have a blinking red light.

The unit is not installed properly. For your safety the unit will only be able to be

turned on when it is properly assembled. Please refer to the assembly pages of

this inspiration guide for assistance.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ninja BL682EU2 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info