23
➔ Press the > key until “PRGRAM
CLEANING” appears.
➔ Press the ‘ok’ key. The display
reads “MANUAL CLEANING”
➔ Press the ‘ok’ key. “EMPTY
TRAYS” appears alternately with
“FILL WATER” in the display.
➔ Continue as described above,
from Point 5.3, ‘Remove the drip
tray …
Tip: If you start the manual clea-
ning program by accident, you can
cancel the operation at the start
by pressing and holding the On /
Off button (fig. 1/F) for about 4
seconds.
5.4 Descaling
Note: The descaling function does
not work if the filter program is
set to ‘operation with filter’ (see
point 4.1 ‘Operating without a fil-
ter’). When the machine needs
descaling, the message “SYSTEM
CALCIF.” appears in the display
and the service button (fig. 1/I)
flashes. However, you can start
the descaling program manually at
any time (see under ‘Descaling
manually’).
Tip: Only press the service button
when you wish to start the des -
caling program. Please strictly ob -
serve the order of the following
instructions when descaling your
machine. You can continue to
make coffee, hot water or steam,
but we do recommend that you
complete the descaling program
as soon as possible.
Caution: Once started, the descal -
ing program cannot be interrupt -
ed. Never use vinegar or acetic
acid based agents for descaling.
Use standard liquid products
avail able in specialist retailers and
recommended for use on fully
automatic coffee centres.
➔ Press the service button (fig. 1/I)
for about 4 seconds. The display
reads “EMPTY TRAYS”.
➔ Empty the drip tray (fig. 1/W)
and replace it in the machine. The
display reads “DESCALER IN
TANK”.
➔ Remove the water reservoir
(fig. 1/B and 2) and fill with water
up to the 0.5 l mark before adding
the descaling agent.
(Caution: never the other way round
– consult the manufacturers’
instructions).
... 5. Maintenance and Care
